Monday, 18 April 2016

ATTERBERG LIMITS

ATTERBERG LIMITS

The Atterberg limits are a basic measure of the critical water contents of a fine-grained soil, such as its shrinkage limit, plastic limit, and liquid limit. As a dry, clayey soil takes on increasing amounts of water, it undergoes dramatic and distinct changes in behavior and consistency. Depending on the water content of the soil, it may appear in four states: solid, semi-solid, plastic and liquid. In each state, the consistency and behavior of a soil is different and consequently so are its engineering properties. Thus, the boundary between each state can be defined based on a change in the soil’s behavior. The Atterberg limits can be used to distinguish between silt and clay, and it can distinguish between different types of silts and clays.

PURPOSE
This lab test is performed to determine the plastic and liquid limits of a fine-grained soil. The liquid limits (LL) is arbitrarily defined as the water content in percent, at which a part of soil in a standard cup and cut by a groove of standard dimensions will flow together at the base of the groove for a distance of 13mm when subjected to 25 shocks from the cup being dropped 10mm in a standard liquid limit apparatus operated at a rate of two shock per second. The plastic limit (PL) is the water content, in percent at which a soil can no longer be deformed by rolling into 3.2mm diameter threads without crumbling.

STANDARD REFERENCE
ASTM D4318- standard test method for liquid limit, plastic limit and plasticity index of soils.

SIGNIFICANCE
The Swedish soil scientist Albert Atterberg originally defined seven ‘Limits of consistency’ to classify fine-grained soils, but in current engineering practice only two of the limits, the liquid and plastic limits are commonly used. (A third limit, called the shrinkage limit is used occasionally). The Atterberg limits are based on the moisture content of the soil.

The plastic limit is the moisture content that defines where the soil changes from a semi-solid to a plastic (flexible) state. The liquid limit is the moisture content that defines where the soil changes from a plastic to a viscous fluid state. The shrinkage limit is the moisture content that defines where the soil volume will not reduce further if the moisture content is reduced.

The original liquid limit test of Atterberg involved mixing a part of clay in a round-bottom porcelain bowl of 10-12cm diameter. A groove was cut through the pat of clay with a spatula and bowl then struck many times against the palm of one hand.

Casagrande subsequently standardized the apparatus and the procedures to make the measurement more repeatable. Soil is placed into the metal cup portion of the device and a groove is made down its centre with a standardized tool of 13.5mm (0.53in) width. The cup is repeatedly dropped 10mm onto a hard rubber base at a rate of 120 blows per minute during which the groove closes up gradually as a result of the impact. The number of blows for the groove to close is recorded. The moisture content at which it takes 25 drops of the cup to cause the groove to close over a distance of 13.5mm (0.53in) is defined as the Liquid Limit. The test is normally run at several moisture content which requires 25blows to close the groove is interpolated from the test results. The liquid limit test is defined by ASTM standard test method D4318. The test method also allow running the test at one moisture content where 20 to 30 blows are required to close the groove. Then a correction factor is applied to obtain the liquid from the moisture content.

The materials needed to do a liquid limit test are as follows;
• Casagrande cup (liquid limit device)
• Grooving tool
• Soil pat before test
• Soil pat after test

IMPORTANCE OF LIQUID LIMIT TEST
The importance of the liquid limit test is to classify soils. Different soils have varying liquid limits. Also, one must use the plastic limit to determine the plasticity index.

DERIVED LIMITS
The values of these limits are used in a number of ways. There is also a close relationship between the limits and properties of a soil such as compressibility, permeability and strength. This is thought to be very useful because as limit determination is relatively simple, it is more difficult to determine these other properties. Thus the Atterberg limits are not only used to identify the soils classification, but it allows for the use of empirical correlations for some other engineering properties.

PLASTICITY INDEX
Plasticity index is a measure of the plasticity of the soil. The plasticity index is the size of the range of water content where the soil exhibits plastic properties. The plasticity index is the difference between the liquid limit and the plastic limit (PI = LL – PL). Soils with high plasticity index tend to be clay, those with a lower plasticity index tend to be silt and those with a plasticity index of 0 (non-plastic) tend to have little or no silt or clay.

 

PLASTICITY INDEX AND THEIR MEANINGS
• 0 – 3 = Non-plastic
• 3 – 15 = Slightly plastic
• 15- 30 = Medium plastic
• > 30 = highly plastic.

LIQUIDITY INDEX
The liquidity index (L.I) is used for scaling the natural water content of a soil sample to the limits. It can be calculated as a ratio of difference between natural water content to plastic limit: L.I = (W – P.L)/ (L.L – P.L). Where W is the natural water content.

 

 

APPARATUS

  1. Sand cone apparatus which consist of a one gallon plastic bottle with a metal cone attached to it.
  2. Balance sensitive to 1 gram.
  • One gallon plastic can with cap.

 

  1. Tools for excavating a hole in the ground like chisel, hammer etc.
  2. Metal tray with a hole in the centre
  3. Plastic air tight bag for carrying wet excavated soil from field to the lab.
  • Scale (weight balance).

 

PR0CEDURES

The following procedures were carried out;

  1. Go to the field were the soil’s unit weight is to be measured, place the metal tray and fasten the four (4) screws. (See Fig A. below).
  2. Dig up to 10 to 15 cm deep.
  • As you are digging the hole, put the retrieved soil into the plastic bag in other that the soil does not loose moisture. All of the soil including the soil at the bottom of the hole is poured into the bag as well.(See Fig. B below)
  1. Having the valve closed, turn the gallon + cone upside down and place the cone in the centre hole of tray and open the valve so that sand flows down to the hole.(See Fig. C below)
  2. After the flow of sand stops, close the valve and pick the assembly up, the sand in the cone will be poured into the tray. This sand will be left there in the field.

NOTE; The plastic bag should be kept close while transferring it to the lab to avoid moisture loss and consequently weight of the soil.

  1. Measure the weight of soil (laterite).
  • Measure the weight of sand in cone.
  • Measure the weight of sand after pouring.
  1. Measure the weight of sand before pouring.
  2. Pour the soil (laterite) into the speedy moisture tester (SMT) and add SMT reagent to find the moisture content.

 

 

CALCULATIONS

The following parameters were obtained from an experiment carried out, a case study of Gilmor Engineering (Nigeria) Limited.

Location

Layer

Soil type

Sand bottle No.

 

Wt. of wet soil from whole W gm

Wt. of sand in cone w7

Wt. of sand before pouring w5gm

Wt. of sand after pouring. W6 gm

Wt. of sand in hole + cone. W5 – W6 gm

Wt. of sand in hole. W8 = w5 – W6 ­­- W7gm

Wet density Dw = WXS/W8 g/ cm3

Mean Moisture content %

Dry density Dsg/cm3 Ds = 100 Dw

100 +m

Laboratory compaction details

O.M.C

Compaction M.D.D

% Compaction

Culvert

2nd Layer Bank filling

Laterite

CL 10

 

2711

420

3000

874

2126

1706

2.05

11.0

1.85

 

 

14.0

1.85

100%

 

 

ROCK BLASTING - PROCEDURES

ROCK BLASTING – PROCEDURES

ROCK BLASTING

Drilling and Blasting is the controlled use of explosives and other methods such as gas pressure blasting pyrotechnics, to break rock for excavation. It is practiced most often in mining, quarrying and civil engineering such as dam or road construction. The result of rock blasting is often known as a rock cut.

Drilling and Blasting currently utilizes many different varieties of explosives with different compositions and performance properties. Higher velocity explosives are used for relatively hard rock in order to shatter and break the rock, while low velocity explosives are used in soft rocks to generate more gas pressure and a greater heaving effect. For instance, an early 20th-century blasting manual compared the effects of black powder to that of a wedge, and dynamite to that of a hammer. The most commonly used explosives in mining today are ANFO based blends due to lower cost than dynamite.

The controlled use of explosives to excavate rock has been part of construction engineering for hundreds of years. In any blasting situation, the geologic structure of the rock mass will be the most important consideration. Other considerations include the degree of scarring that would be acceptable (some areas can tolerate more blasting scars than others), cost and safety (blasting cannot be performed in close proximity to populated areas).

 

 EFFECT OF GEOLOGIC PROCEDURE

The first consideration when designing a blasting operation should be the local geologic conditions. Rock competency and fracture patterns can have a significant impact on the success of a blasting operation.

DISCONTINUITY SETS.

When discussing blasting, the single most important geologic factor is fracture; the spacing and orientation of any breaks or discontinuity sets in the rock in particular. The orientation of the discontinuity sets with respect to the cut slope angle will influence any slope failures that may occur along the slope face. The modes of failure can be grouped into four primary mechanisms as shown below;

  • Planar failure (a)
  • Wedge failure(b)
  • Circular failure (c)
  • Toppling failure (d)

 

 The four primary mechanisms of slope failure(d)

 SOME MAJOR PROCEDURES IN BLASTING

  1. PRESPLIT BLASTING;

DESCRIPTION

Presplit holes are blasted before production blasts. Procedure uses small diameter holes at close spacing and lightly loaded with distributed charges.

ADVANTAGES

This Protects the final cut by producing a fracture plane along the final slope face that fractures from production blast cannot pass. Can produce steeper cuts with less maintenance issues perform well in hard competent rocks.

LIMITATIONS

The small diameter borings limit the blasting depth to 15m (50 ft). Bored holes traces are present for the entire length of boring. It does not perform well in highly fractured weak rocks.

  1. SMOOTH BLASTING.

DESCRIPTION

Smooth blast holes are blasted after production blast. Procedure uses small diameter holes at close spacing and lightly loaded with distributed charges.

ADVANTAGES

It produces a cosmetically appealing stable perimeter. This can be done on slopes years after initial construction. Drill hole traces are less apparent than prespliting.

LIMITATIONS

The small boring diameter limits blasting depth to 15m (50 ft). Borehole traces are present for much of apparent than prespliting the boring length.

  1. CUSHION BLASTING.

PROCEDURE

Cushion blasting is done after production blast. Larger drilled holes are used with small diameter, lightly loaded distributed loads. Spaces around the explosives are filled with crushed rock to cushion the explosive force.

DESCRIPTION

Reduces the amount of radical fracturing around the borehole and also reduces borehole traces. The large diameter holes allow blasting depths up to 30m (100 ft).

SAFETY IN ENGINEERING CONSTRUCTION

SAFETY IN ENGINEERING CONSTRUCTION

Safety is the state of being “safe”, the condition of being protected from harm or other non-desirable outcomes. Safety can also refer to the control of recognized hazards in order to achieve an acceptable level of risk.

Construction is a high hazard industry that comprises a wide range of activities involving construction, alteration, and/or repair. Examples include residential construction, bridge erection, roadway paving, excavations, demolitions, and large scale painting jobs. Construction workers engage in many activities that may expose them to serious hazards, such as falling from rooftops, unguarded machinery, being struck by heavy construction equipment, electrocutions, silica dust, and asbestos.

Safety is of a paramount importance in engineering, both during its construction and when it is opened for use. To prevent and minimise and damages during construction relevant signs and warnings are used such as diversion, notice, flaggers and warning signs etc. Examples include flashlights, beacons, cones etc.

 

 Safety during construction

Construction work on the road or roadway can, in the absence of adequate planning. Organisations and implementation, lead to unsafe conditions for workers and all road users including pedestrian and cyclist. Highway construction and maintenance signs fall into the same three major categories as do other traffic signs, namely

  • Regulatory signs e.g. stop sign, one way sign, yield sign etc.
  • Warning signs e.g. construction approach warning signs, detour sign, road closed sign etc.
  • Guide signs e.g. approaching barrier sign, barricades etc.

Safety within the work zone

  • Restrict personal access points into work areas and define/designate ‘no backing zones’ and ‘pedestrian-free zones’.
  • Design into the Temporary Traffic Control Plan flow paths for equipment and vehicle traffic to minimize backing manoeuvres where possible as well as buffer spaces to protect pedestrian workers from straying traffic vehicles and/or work zone equipment.
  • Establish procedures for entering and exiting work zone.
  • Train all employees on the Temporary Traffic Control Plan and its precautionary measures.

Safety requirements for workers

  • Wear high-visibility safety apparel (vest & head gear in photos)
  • Be alert for construction vehicles and equipment as well as general traffic.
  • Check surroundings often for hazards.
  • Know the plan for traffic flow.
  • Keep a safe distance from traffic.
  • Communicate with other workers, especially when there are changes in procedures, locations, or traffic flow pattern.

CONSTRUCTION EQUIPMENT

CONSTRUCTION EQUIPMENT

Equipment used in road construction depends on the type of material and the quantity involved in each activity. Some equipment can be used for in different activities, but others can be used only for specific activities.

 

RIPPER

Ripper is a claw-like device which consists of one or more shanks or teeth equipped at the rear of a bulldozer used to loosen densely compacted materials. Rippers can also be used to aerate the soil for drying or adding moisture.

 

BULLDOZERS

Bulldozers are high powered crawler, tractor with blade fixed at the front. It is used for pushing, spreading, vegetation clearing etc. A tree dozer is usually used for felling trees and uprooting stones/boulders.

 

MOTOR GRADER

Motor grader is used in the construction of base courses, grading and other activities that require the fine control over the placement of soil. The motor grader consists of a tractor or prime mover and blade mounted on a frame with a long wheel base. This equipment is versatile due to its manoeuvrability.

 

WATER TANKERS

Water tankers usually with carrying capacity of 4000-5000 litres carrying capacity with sprinklers attached at the rear to aid in uniform distribution.

ROLLERS

Rollers are equipments which are used for compaction, i.e. increasing the density of sub base, base and pavement material. There are different types of rollers available. The type being used usually depends on the type of materials been compacted. Examples are;

  1. Smooth-wheel rollers are used for the compaction of sand, gravel and mixtures of sand and gravel
  2. Sheep-foot rollers are used to compact fine-grained soils, as well as mixtures of sand and fine-grained soils.
  • Pneumatic tyre rollers are used to compact almost any kind of soil including bituminous pavement but are not suitable for compacting aggregate.

 

PAVERS

Pavers are used to lay asphalt on roads, bridges etc. It lays the asphalt flat and provides minor compaction before it is compacted by a roller. Pavers used to lay asphalt are called asphalt pavers, while those that are used for laying concrete pavers.

 EXCAVATORS

Excavators are heavy equipment consisting of a boom, bucket and cab on a rotating platform (known as the “house’’). The house sits atop an under carriage with tracts or wheels. All movement and functions of the excavator are accomplished through the use of hydraulic fluid, be it with ram or motors.

 

TRUCKS

Trucks are vehicles used for transporting loose materials (such as sand, gravel or dirt for construction. A typical truck is equipped with hydraulically operated open-box bed hinged at the rear, the front of which can be lifted up to allow the contents to be deposited on the ground behind the truck at the site of delivery.

 ASPHALT MIXING PLANT

Asphalt mixing plant is equipment for producing good quality or hot mix for flexible pavement construction. The ingredients of the hot mix in required proportion are continuously fed to the rotating drum in drying and mixing zones and the discharge end of the drum delivers continuous output of the hot mix.

 

BITUMEN SPRAYER

Bitumen sprayer is used for track coat and between sprayer applications. The equipment is capable of applying a uniform coating of hot and emulsion bitumen on specified surface in prescribed quality.

Thursday, 14 April 2016

Computers Professional

INTRODUCTION:COMPUTERS PROFESSIONAL

A computer professional may be a person working in the field of information technology. A person who has undergone training in a computer-related field from colleges, universities and computer institutes. A computer professional is a person who has an extensive knowledge in the area of computing.

The common computer professionals are as follows:
i. Programmers and Software Engineers
ii. Computer Scientists
iii. Computer Systems Analysts
iv. Computer technicians
v. Database Administrators
vi. Network Administrators
vii. System Administrators
viii. Information Technology Consultants
ix. Web Developers

i. Computer Programmer and software Engineers: A software engineer is a person who applies the principles of software engineering to the design, development, maintenance, testing, and evaluation of the software and systems that make computers or anything containing software work.

ii. Computer Scientist: A computer scientist is a scientist who has acquired knowledge of computer science, the study of the theoretical foundations of information and computation and their application. Computer scientists typically work on the theoretical side of computer systems, as opposed to the hardware side that computer engineers mainly focus on (although there is overlap). A primary goal of computer scientists is the development (and validation) of models often mathematical in nature for estimating the properties of computer-based systems (processors, programs, computers interaction with people, computers interacting with other computers, etc.) with an overarching objective of discovering designs that admit for improved performance (faster, better, cheaper, etc.).

iii. Computer Systems Analysts: Computers systems analysts study an organization’s current computers systems and procedures and design information systems solutions to help the organization operate more efficiently and effectively. They bring business and information technology (IT) together by understanding the needs and limitations of both.

iv. Computer Technician: A computer technician is a person who repairs and maintains computers and servers. The technician’s responsibilities may extend to include building or configuring new hardware, installing and updating software packages, and creating and maintaining computer networks.

v. Database administrators: Database administrators are responsible for backing up systems to prevent data loss in case of a power outage or other disaster. They also ensure the integrity of the database, guaranteeing that the data stored in it come from reliable sources.

vi. Network Administrator: Network administrators are responsible for the upkeep of computers hardware and software systems. They usually focus on the network components within their company. In some cases it is the responsibility of network administrators to design and implement new networks.

vii. Systems Administrator: A system administrator, or sysadmin, is a person who is responsible for the upkeep, configuration, and reliable operation of computer systems; especially multi-user computers, such as servers. computer systems administrators are responsible for the day-to-day operation of these networks. They organize, install, and support an organization’s computers systems, including local area networks (LANs), wide area networks (WANs), network segments, intranets, and other data communication systems.

viii. Information Technology Consultant: An information technology consultant is a third-party service provider who is qualified to advise clients on the best use of IT to meet specific business requirements. IT consultants may work with a professional IT consultancy firm or as independent contractors.

ix. Web Developer: A web developer is a programmer who specializes in, or is specifically engaged in, the development of World Wide Web applications, or distributed network applications that are run over HTTP from a web server to a web browser.

COMPUTERS PROFESSIONAL BODIES

The bodies for computer professions in Nigeria is called Computers Professionals Registration Council of Nigeria (CPN).

The Computers Professionals Registration Council of Nigeria (CPN) was established by Decree No. 49 of 1993, promulgated on June 10, and gazetted on August 9, of that year.

The Computers Professionals Registration Council of Nigeria (CPN) is a body corporate with perpetual succession and common seal, a legal entity charged with the control and supervision of the Computing Profession in the country.

In Nigeria, CPN develops standards for Information Technology practice and ensure compliance by individuals and corporate bodies that practice the computing profession or render IT services in whatever form. CPN is an abbreviation of Computer Professionals (Registration Council of Nigeria).

Its functions and responsibilities include the following:

1. To determine the standards of knowledge and skills to be attained by persons seeking to become members of the computing profession and improve those standards from time to time as circumstances may permit.

2. To secure, in accordance with the provision of the Act, the establishment and maintenance of a register of persons seeking to be registered under the Act to practice the computing profession and the publication from time to time of the list of such persons.

Consequently, the Council is responsible for the following among other things:

  • Organization, Control and supervision of computing practice in Nigeria.
  • Screening of individuals seeking to be registered to engage in the sale of computational machinery and techniques related thereto and the provision of professional services in computing in the country.
  • Ensuring high computing professional Ethics and Standards.
  • Creation and sustenance of local and international contacts for our numerous members,
  • Reduced charges for some specific professional services and facilities.
  • Determining academic standards in Computer Science, Computer Engineering and other related disciplines.
  • Accreditation of institutions’ courses and programmes as well as evaluation of certificates in computing.
  • Conducting professional examination in computing in collaboration with the Nigeria Computer Society.
  • Publication of the Register of Computer Professionals and other professional works like journals, books, magazines and newsletters.

REFERENCES
1. “Computer and Information Research Scientists”. U.S. Bureau of Labor Statistics. March 29, 2012. Retrieved 2012-06-03.

2. Benjamin Beau Perry. “What is a computer scientist?”. The University of Newcastle.

3. “Computing Degrees & Careers » Computer Science”. Computingcareers.acm.org. Retrieved 2012-06-03.

Saturday, 12 March 2016

THE CAUSES AND EFFECT OF COMMUNICATION BREAKDOWN IN THE ORGANIZATION

THE CAUSES AND EFFECT OF COMMUNICATION BREAKDOWN IN THE ORGANIZATION

INTRODUCTION

It’s natural in every organization to have laid down rule of organization structure with the flow chart of communication within the organization between the employees of various departments. To achieve the goals and objectives of the organization communication plays a vital role of improving the organizational performance with effective communication; good communication skills are also required in hiring qualified candidates to work in an organization. Communication skills enhanced managers’ efficient and effective productivity of the organization, no communication no organization. Therefore, communication is derived from a Latin language ‘Communicare’ which means to share. Therefore communication could be described as process of passing information and understanding to one or more persons. It is a means by which behavior is modified, change is affected and information is made productive in order to achieve objectives and goals of organizations.

In an organization, there are different units performing various functions. Thus, communication serves as a linking process by which parts of a system are tied together. Communication provides the links, which bind an organization together in other to evolve common understanding. (Rogers et al 2002)

Freeman, (2005) define communication as the process by which people attempt to share meaning via the transmission of symbolic messages.

Communication breakdown in business organization has lead to frustration, loss of productivity and strained employees relation and failure to address to problem in communication with employees will cause the situation to be deteriorate even further and some causes of a break in communication are easy to spot like culture and personality differences and these has made this study to become necessary to be reviewed to ascertain and investigate the causes of communication breakdown in organization.

Aim and objective of the study

The aim of this paper is to find out the causes and effect of communication breakdown in the organization.

  • To achieve the above stated aim the following objectives shall be pursued;
  • To identify the communication lapses in the organization.
  • To examine the causes of communication breakdown in the organization
  • To examine how poor listening skills of employees affect organizational performance and
  • To suggest a better ways to improving effective communication in an organization.

Significant of the study

The researcher hope and believe that this paper work will serve as a useful instrument to the organization and the society at large and beneficial to general readers and fellow respondents who may want to conduct similar or related research.

 LITERATURE REVIEW

Literature review focuses on the documentation of recognized authorities as it affect the problem of this study based on the historical of communication, meaning and difficulties of effective communication in an organization.

According to Peter Little in Tonga Volume 11 of “use of English” says communication is the process by which information is passed between individual and organization by means of previous agrees symbols. According to Bernard (1958) as define communication as “means by which people linked together in an organization to achieve a common purpose.

The above definition forms the essential elements of effective communication in an organization namely:

  • A message sender
  • The message
  • Message vehicle (noise)
  • Message receiver (or listener)
  • An understood message and feedback

Both sender and receiver of any message share a common responsibility. The sender should ensure that his message is such that could be understood.

Message could be in the form of an instruction or information. An instruction in the sense that the receiver is told the definite things he is expected to accomplish. Information could take two forms namely; Information properly and news. Information proper guides the receiver on what decision to make while news is of no value for decision making.

However, what is important about communication is that the receiver must understand the message that has been sent across by asking certain questions; it may be possible to find out if the receiver has actually understood the message. This make communication to be a two way process in a sense that it prevents the development of psychologically negative attitude among the personnel in an organization. Thus, a feedback mechanism should be built into a communication process. There is need therefore to avoid an excessive amount of one way communication. (Uwakwe,2004)

It is pertinent to say that communication has been characterized as the life wire of any organization. Without communication, organization doesn’t achieve goals. The purpose of communication in an organization is to effect change-to influence action towards the welfare of the enterprise. Communication is essential for the internal functioning of enterprises because it integrates the managerial functions. (Wiehirich et al 2005). Especially communication is needed of an organization:

  • To established and disseminates the goal of an organization.
  • To develop plans for their achievement
  • To organize human and other resources in the most effective and efficient way
  • To select, develop and apprise members of the organization
  • To lead, direct, motivate and create a climate in which people want to contribute and
  • To control performance.

Generally, in the opinion of Efimova, (2004) much of the work of finding, interpreting and connecting relevant pieces of information, negotiating meanings and eliciting knowledge in conversations with others, creating new ideals and using them to come up with a final product happens as part of communication in organizations.

 

TYPES OF COMMUNICATION.

The following types of communication are briefly discussed: written, oral and nonverbal communication (Tennen, 1995). Written and oral communication media have favorable and unfavorable characteristics; they are often used together so that the favorable qualities of each can complement the limitations of the other. In addition usual aids may be used to supplement both oral and written communication. It is believed that a message that is repeated through several media will be more accurately comprehended and recalled by the receiver. Hence Wiehirich et al, (2005) says that in selecting the media, one must consider the communicator, the audience, and the situation. An individual who feels uncomfortable in front of a large audience may choose written communication rather than speech. On the other hand, certain audience who may read a memo may be reached and become motivated by direct oral communication

On the other hand written communication occurs when a sender puts on paper the information he wants to sends. It is mostly made for formal message. Written communication has the advantage of providing records reference and legal defense. (ii) Message can be carefully prepared and can be read by large audience (iii) can promote uniformity in policy and procedures. (iv) Can reduce cost in some cases.

The disadvantages of written communication are: written message may create mountain of paper, may be poorly expressed by ineffective writers and may provide no immediate feedback. Consequently, nit may take a long time to know whether na message has been received and properly understood.(Stunk et al 1999) .

Non verbal communication: this is the conveyance of thoughts and feelings without the use of words., people communicate in many different ways, what a person says can be reinforced (or contradicted) by nonverbal communication, such as facial expressions and body gestures. Nonverbal communication is expected to support the verbal, but it does not always do so. Manager may states that they have an open door policy, but then they may haven a secretary carefully screen people who want to see them; this creates incongruence between what they say and what they do. Clearly, nonverbal communication, giving rise to the saying that actions often speak louder than words.(Weihrich et al, 2005).

Channels of communication in an organization

Effective communication enables management to perform appropriate functions and achieve pre-stated results. However, for a communication to be effective

These channels are means of transmitting information within and outside the organization these channels are broadly categories into formal and informal communication channels. (Madu 2006).

Internal communication: all organization generates internal communication. Communication flows within an organization are multi- direction, messages are sent verbally downward from one level to lower by way of chain of command. Most orders and instructions take this path. But much communicating is vertically upward, from lower level to higher levels. Managers require information from subordinates about their problems, work in progress and other data that relate to what the organization is doing. (Appleby, 2003)

External communication: all enterprises also initiate communication with individuals and groups outside the organization. Generally as an organization grows, external communications increase and may include thousands of suppliers, wholesales, retailer and other types of organization.

  Barriers to communication in an Organization

One of the functions of communication is to ensure that each individual in the organization knows what he/she is expected to be doing at work to further the goals of the organization. Good communications are essential to getting any organizational activities done because co-operation is impossible without it. However, difficulties to good communication arising from differences in social, racial or educational backgrounds, compounded by age differences, communication breakdown and poor listing skills (BPP 2000). Other communication barriers according to Madu,(2006) include: Emotionality, different perception, influence of attitude and differences in status and power. In this study specific attention is being paid to two barriers in communication, which Holmes (2007) noted are very critical problems in organizations. These are:

  • Breakdown in communication
  • Poor listing skills of employees in an organization.

Breakdown in communication: it is surprise that managers frequently site communication breakdown as one of their most important problems, however, communication problem are often symptoms of more deeply rooted problems as a result of poor planning which may be the cause of uncertainly about the direction of the organization (Wiehrich et al 2005). Similarly, a poorly design organization structure may not clearly communicate organizational relationships. Vague performance standards may leave managers uncertain about what is expected of them

(Holmes 2007). Thus the perceptive manager will look for the causes of communication breakdown, which could include:

Communication downward (i.e. from superior to subordinates) may breakdown because of poor organization, confusion about the message being transmits or for personal reasons. If the channels of communication are inefficient or insufficient, the organization is at fault. Confusion will also occur if the superior manager is incompetent and issues instructions, which cannot be understood because they do not make sense. Poor personal relations between superior and subordinate will cause a breakdown in communication because of mutual suspicion or because of their different backgrounds.

Communications upward (from subordinate to superior) may breakdown fro the same reasons. An additional consideration is that the subordinate, because he wants to hide his own errors on the errors of a fellow worker,

Horizontal communication. Horizontal communication (i e. between people on the same hierarchical levels, perhaps in different department) may cause breakdown of communication because departments are geographically separated with inadequate communication links. There is no formal organization for the cross-fertilization of ideas and opinions between departments, the organization is too centralized and insists on all such negotiations being made at top management level, or/ and because there is a poor informal communication structure.

Poor Listening skills of employees: The researcher has observed people entering discussion with comments that have no relation to the topic. The rushed, never-listening manager will seldom get an objective view of the functioning of the organization. Time   empathy and concentration on the communicator’s message are prerequisites for understanding. People (manager) want to heard, want to be taken seriously, and want to be understood. Thus managers most avoid interrupting subordinates and putting them on the defensive. Employees should learn the techniques of better listening in order to maintain good relation with those who deal with the organization. Poor listening is perhaps none of the most serious barriers to effective communication. Poor listening can generate costly accidents and cause misunderstanding and rumors in an organization. (Weihrich et al, 2005).

Uncertain Reporting Relationships

Effective communication is hard to develop if people don’t know who to communicate with in certain situations. In many cases, employees understand their role with an immediate manager. However, the employee and manager may not really understand when and how to interact.

Poor Culture

A poor organizational culture can dramatically affect communication. In general, employees who are unhappy or uncomfortable in their workplace are less likely to communicate openly. Employees who don’t find their managers approachable may not seek help or offer input when need arises. Major problems exist with colleagues or work team members don’t get along. Some organizations instill diverse work teams, but don’t offer informal and formal ways for employees to build rapport. This lack of rapport can cause tension, and ultimately lead employees to shut down or avoid interaction.

Indecisive Leadership

The tone of communication usually starts at the top. If top managers communicate openly and clearly, their approach tends to filter down throughout the organization. Front line managers may more openly communicate with their work teams. When top managers are indecisive or lack confidence in the company’s vision, they may be reluctant to communicate as a way to avoid showing vulnerability. This silent approach to leadership can lead to distrust in the work environment, and cause informal gossip to take over.

Technology Problems

While face-to-face communication is imperative in many organizations, technology fuels a lot of important communication as well. Computers and mobile technology drive interaction in many cases. Sales reps often connect with home offices through cell phones, e-mail and tablets, for instance. These alternative forms of communication only work if the technology works and the employees involved know how to use it. Weak tools, defective equipment and poor employee training all can cause communication breakdowns.

CONCLUSION

In conclusion, Communication in a business is key to getting all leaders, departments and employees on the same page in working toward objectives. Breakdowns in communication can knock a company off track and prevent it from reaching its full potential. Understanding the core factors in breakdowns can help you proactively prepare to avoid them.

REFERENCES

Appleby, R.C. (2003) Modern Business Administration, London Pitman Book Ltd

Barnard ,C.J (1958). Practice of Communication. London. Pitman   Publishing Limited.

Nwanwene T.A.M.. (2007) Communication and Sustainable Development in

Nigeria

Rogers, C.R. and Roethlisberger (2002). Barriers and Gateways to communication, Boston: Harvard Business Review.

Peter L. (1965). Communication in Business, London, Longman Group 3rd Edition.

DIFFERENCE BETWEEN CONSUMER AND INDUSTRIAL GOODS

DIFFERENCE BETWEEN CONSUMER AND INDUSTRIAL GOODS

INTRODUCTION: CONSUMER AND INDUSTRIAL GOODS

Physical products or goods have been classified into two separate categories, consumer goods and industrial goods. The classification or distinction between these two types of goods is necessary in order to determine different efficient strategies which are required to help in moving the products through the marketing system.

Product: A product can be refer to anything tangible and intangible that is capable of satisfying human wants.

Consumers goods

Consumer goods are goods purchase for immediate consumption or for household use. These goods are distinguish among convenience, shopping specialty, and unsought goods.

The goods which are bought for household use, personal use, or family use from retail stores are called “consumer goods”. The consumers have certain buying habits and based on these habits the consumers goods are divided into three different sub-categories:
• Shopping goods
• Specialty goods
• Convenience goods.
The consumer goods can also be differentiated or categorized into durable and non-durable goods.

Durable goods are goods which have longer durability such as furniture etc. Whereas, non-durable goods include food, supplies for school etc.

1. Convenience Goods: Goods which the consumer wants to buy with maximum convenience are mostly non-durable, bought in small quantities, are of low value, and frequently purchased are called “convenience goods” like milk, bread etc. These goods which are planned buys are called “staple goods” where are goods like newspapers, candies, etc which are bough impulsively and where not planned are called “impulse goods”.

2. Shopping goods: The goods which are of higher value, purchased infrequently after a lot of comparing and deliberation by the consumer are called “shopping goods” like televisions, refrigerators etc.

3. Specialty goods: Goods which are special for a consumer for which he has planned a lot and wants at all costs are called “specialty goods” like clothing of a special brand, automobile of a particular brand, jewellery etc.

Industrial Goods

Goods which are bought by companies to produce other products which are sold later are called “industrial goods”, these goods can be directly or indirectly used in  the production of goods which are classified according to their usage instead of consumer habits.

The durable goods are called “capital items” as they are of very high value and non-durable goods are called “expense items” and are usually used within a year. They have been categorized into five subcategories:

  • Industrial supplies: These include frequently bought expense items like computer paper, office supplies, light bulbs which help in the production of a final product are called industrial supplies.
  • Installations: Capital items used directly in making other goods are called “installation goods” like machine tools, conveyor systems commercial ovens etc.
  • Fabricated parts and materials: Goods which are used in a final product without processing are called “fabricated parts” like batteries, spark plugs, etc, used in automobiles. Items which require processing before using in final products are called “fabricated materials” such as steel, fabric for upholstery etc.
  • Accessory Equipment: Accessory equipment are capital items which have a shorter life and are less expensive than installations such as hand tools, desk computers etc.
  • Raw Materials: Products bought in their raw form like crude oil, iron etc which need to be processed before producing any goods are called “raw materials”.

Differences Between Consumer And Industrial Goods

Given below are some of the differences between consumer and industrial goods.

  1. The consumer goods are those which are meant for final consumption by the consumer or in simple words they are used by the consumers directly while industrial goods are those which are not used by the consumers directly but these goods are used for the production of consumer goods.
  2. Bread, Soap, furniture are some of the examples of consumer goods while lubricants, copper, timber, tools etc are some examples of industrial goods.
  3. While the number of customers for consumer goods is very large but the quality purchased by them is less whereas the number of customers for industrial goods is less but they purchase the quantities in bulk.
  4. The demand for consumer goods is autonomous demand as these goods are demanded for ultimate consumption while the demand for industrial goods is derived demand as these industrial goods are used for the production of consumer goods.
  5. While the market in which the companies can sell consumers goods is large because of large number of customers whereas in case of industrial goods the market is small because of less number of buyers of such goods.
Conclusion

Industrial goods and consumer goods cannot be clearly differentiated from each other. The differentiation depends on what the consumer intends to do with the product: thus, those goods which are ready and in final forms to be sold and are bought by the consumer to be resold can be classified as “consumer goods” whereas, if the goods are bought by a consumer for their own use to produce other products, they are called “industrial goods”.

REFERENCES
  1. O. ODE; B.O Duru NNEBUE; C.M. Mathew (2011): Fundamentals of Marketing Principles and Applications, 6th edition, Divine computers, Kaduna.
  2. Amber, T. (2003): Marketing and the Bottom Line. The New Methods of Corporate Wealth, 2nd Pearson Education, London.
  3. Internet “Google”
  4. Abbah Adikwu Linus: Basics to purchasing Management 1st edition Ray Product, Makurdi.

A SAMPLE PROPERTY INSPECTION AND SURVEY REPORT

A SAMPLE PROPERTY INSPECTION AND SURVEY REPORT

INSPECTION AND SURVEY OF A PRIMARY SCHOOL LOCATED AT KOFAR KUDU, NASARAWA.

INTRODUCTION

In accordance with your instruction that we should carry out a proper schedule of condition of a primary school, we have conducted the physical inspection and have the pleasure to furnish you with the report.

DATE OF INSPECTION

The physical inspection were carried out on the 10th January, 2015 which forms the effective date of the report. All observations and opinions in this report refer to this date.

PURPOSE OF INSPECTION

This inspection was required to serve as a record of the condition of the property.

LOCATION OF PROPERTY

The subject property is situated within Kofar Kudu, Nasarawa it is one of the primary school developed by the government.

DESCRIPTION OF PROPERTY
SITE

Occupying a very large area of land, the site is endowed with soil qualities that can support the building purpose. In other words the site is suitable for construction work. Moreover, the topography of the site is moderate.
Finally, there is easy accessibility between the site and adjoining properties and the neighbourhood at large. There is however no fence wall enclosing the property.

STRUCTURAL DETAILS
FOUNDATION

Strip foundation and assumed to be taken to a reasonable depth.

FLOOR

All floors are fundamentally made of mass concrete on well rammed hardcore filling.

WALLS

Both external and internal walls are made of sandcrete blocks, in mortar and plastered. They were predominately painted with yellow texture paint but a particular section was painted with blue and a particular section was not plastered both internal and external.

DOORS

The entrance doors to the classes are single swing leaf metal doors.

WINDOWS

All the windows are also made of double swing leaf type.
CEILING
The ceiling is made of asbestos nailed on wooden ceiling noggin and protected with fine ceiling battings.

ROOF

The roof is made of zinc roofing sheets.

DETAILS OF ACCOMMODATION

19 No. Class rooms
4 No. Offices
28 No. Of seat per class
5 No. Store
2 No. Laboratory

INVENTORY OF FURNITURE AND FITTING

5 No. Ceiling fans
3 No. Chairs in each classroom for staff
1No. Tables in each classroom

DECORATIVE STATE OF REPAIR

The primary school can be said to be in an old stage, therefore, it is in a fair decorative condition.

ASSUMPTION AND LIMITING CONDUCTION

This work has been conducted subjected to the fitting assumption and limiting conditions. All the information passed to us and all were observe for the purpose of this report are genuine and accurate for the purpose of the work here in carried out.

RECOMMENDATIONS

For maximum economic benefit, the primary school should be renovated as it provide the government with a favourable return. Moreover, a sound maintenance cycle should be put in place.

CONCLUSION

By the power and privileges conferred on us members of HNDII estate management department, Nasarawa. Our opinion is that the property is in a fair physical condition and has the capacity of providing of providing favourable return to the government

To this end, we suggest that the government should to take of all the repairs without further delay of voids so as to ensure prompt economic viability.

 

Thursday, 3 March 2016

IMPACT OF FUEL SUBSIDY REMOVAL ON NIGERIAN ECONOMY

IMPACT OF FUEL SUBSIDY REMOVAL ON NIGERIAN ECONOMY

INTRODUCTION

A subsidy is a benefit given by the government to groups or individuals usually in the form of a cash payment or tax reduction. The subsidy is usually given to remove some type of burden and is often considered to be in the interest of the public.

Fuel subsidy is payment made by the federal government to assist her citizens consume fuel at lower cost. When the cost is higher they can decide not to make payments. When this happens then it is called “subsidy removal” Subsidy may be made not only to consumers but also to producers. It may be in form of price guarantee to make the producers produce more food. Subsidy is often common, where it is given to producer of food to reduce food insecurity (FAO, 2012). There are so many different way to classify subsidy, labour subsidy, infrastructural subsidy, export subsidy, consumption subsidy, (Yemi, 2012). Much as subsidy is an economic necessity, who benefit from it? Is it the citizen or the government? This question is necessary because government continue to have more money at the expense of the citizens when there is subsidy removal, but if there is no subsidy removal, the citizen’s benefit. Government removal of subsidy is always hung on the premise that it will use the money realize to provide infrastructures. This has never been achieved. This culminated to the formation of Subsidy Reinvestment
Programme (SURE-P) to manage the funds accrued from the subsidy removal (Alwell, 2012) Despite the (SURE-P) intervention the people still did not see any benefit of subsidy removal. The cost of the fuel subsidy continues to expose the citizens to untold hard-ship due to rising cost of fuel as well as transportation which indirectly affect food prices.

REMOVAL OF FUEL SUBSIDY IN NIGERIA

The Federal Government of Nigeria in its efforts to deregulate the downstream oil sector completely decided to remove fuel subsidy on January 1st 2012, under the leadership of President Goodluck Jonathan. This was made real when the president of Nigeria decided not to make provision for subsidy payment in the 2012 appropriation bill (the budget). The president came up with a strong argument that the sum of 3.4 billion naira spent in subsidizing fuel went into fraudulent hands (Gyoh, 2012). The sum of 1.4 trillion Naira spent annually in subsidizing fuel, had slowed down economic growth. It was against this back drop that the government through the instrumentality of the Petroleum Product Price Regulatory Agency (PPPRA) announced the removal of fuel subsidy by 32 naira thereby moving the previous price of fuel from 65 naira to 97 naira per litre. This singular act brought about massive protest across Nigeria by labour unions and civil society groups to speak against this policy.

Government also insisted that subsidy removal will eliminate fuel smuggling across Nigeria boarder thereby eliminating scarcity in Nigeria. Although, in-spite of these benefits, the federal government was not unaware of the hardship that would accompany subsidy removal policy and as such promised some palliative measures to reduce the hardship.

The present government of the day, the APC government under the leadership of President Muhammed Buhari have succeeded in complete removal of fuel subsidy in Nigeria as there was no provision for fuel subsidy in the proposed 2016 budget.

The Negative Impact of Oil Subsidy Removal In Nigeria

Increased Cost Of Living In Nigeria

Gasoline, premium motor spirit (PMS) or fuel as it is normally called in Nigeria is the second most used product after food in Nigeria. Whenever the price of fuel goes up, the price of everything goes up. This is because transport cost for providing essential services goes up and it creates multiplier effect in the economy, the ripples are felt even up to the rural areas. No part of the economy functions in isolation, every part of the economy depends on the other for services. The movement of agricultural product from one place to another depends on the transport subsector, the tagging of price of agric transport cost; Removal of subsidy means increase in transport cost, increase in the cost of running business (Small scale business), and increase cost of production which generally translate into high cost of living in Nigeria.

Despite the unrest, the decision to abolish Nigeria’s fuel subsidy is the right one. In 2011 alone, Nigeria’s fuel subsidy cost the country an estimated $8 billion and the price tag for 2012 was expected to be even greater. This does not even take into account the country’s losses due to market distortions as a result of the subsidy.

While politically costly in the short run, if Nigeria’s government can implement transparent and well-structured reforms, the funds from the fuel subsidy program could be put to far greater use.

With an estimated 37.2 billion barrels of proven oil reserves, Nigeria is one of the world’s largest oil producers. However, the country’s mineral riches have not resulted in a significant improvement in the quality of life for the majority of Nigeria’s citizens, 54 percent of whom live below the national poverty line. In 2010, Nigeria earned $59 billion from oil exports. Therefore, Nigeria does not lack the resources to reach its development goals, rather its resources have been utilized inefficiently.

The Positives Impact of Oil Subsidy Removal In Nigeria

 

If fuel subsidy is removed in Nigeria, Natural monopoly (by the NNPC) will automatically be destroyed, giving room for private companies and thus competition. Just as it was in the days of NITEL (Nigerian Telecommunications), before the telecommunication sector was deregulated and the door was opened to private investors and thus a revolutionary good to the Nigerian economy. Just as it was then, when new companies flood in there will be an increase in price, SIM cards then were as high as N50, 000. In the face of competition, this dropped as low as N100. Same will be the case for oil, when the subsidy is removed, petrol may sell as high as N160 per litre, but when competition comes in it will drop to the barest minimum, possibly lower than N65 per litre.

The amount the Government pay on subsidy can be channeled to meeting social needs like free and quality health care and education for all. This is therefore a right step in the right direction, and is capable of helping Nigeria achieve her vision 202020.

It’s no news that the Nigerian oil sector loses 40% of her oil produce annually to the mis-managing hands of flaring. Flaring causes pollution and subsequently the depletion of the ozone layer. If the sector is deregulated and subsidy is removed, flaring will drop drastically as no company will want to lose that much.

When the price of petroleum product sky rockets within the first 6-12months after the removal of subsidy, Nigerians will look elsewhere for generation of Fuel. This will lead to the development of alternate power supply. This can help the solar energy sector thrive better. Also, it can help the coal industry find her foot in the Nigerian Market.

Retrenchment is inevitable in cases of deregulation on the short run, but on the long run employment opportunities will be nearly unlimited. A good example is that of telecommunications, when the sector was deregulated, the staff of NITEL lost their jobs in hundreds. But in no time, jobs were all over in MTN, GLO, ZAIN, ETISALAT, VISAFONE and about 16 other companies in thousands. The case will be identical for the downstream oil sector.

The recently launched GLO 1 cable had made indigenous telecommunication company, Globacom, capable of selling bandwidth to international companies. The same would be the case in the Petroleum industry if deregulated.

Removal of Fuel subsidy is a hard one to sell; this is due to the fact that we, the masses are not ready to look the other way on this issue. The removal of oil subsidy, if properly done has inexhaustible benefits. Removal of subsidy from black gold in Nigeria is an awful tasting medicine, but the Nigerian patient is in dire need of it.

CONCLUSION

A subsidy as discussed above is a benefit given by the government to groups or individuals usually in the form of a cash payment or tax reduction so fuel subsidy is the reduction in the cost of fuel per litre given by the Nigeria government to her citizens. The removal of this subsidy means that the fuel price per litre will go higher than usually which at the moment make will life more unbearable for Nigerian people as the price of almost everything will go up. But if properly handle over time the result of the subsidy removal and deregulation of the petroleum down stream will definitely have a greater positive side as this is believed to bring down the price as a result of competition, provision of employment opportunities, creation of more job opportunities as more jobs will be created if more private sectors are involved in refining and marketing of petroleum products. There will increase in provision of more social amenities and infrastructure as the government will use the money meant for subsidy on developmental project.

Finally I will conclude that the removal of fuel subsidy at the onset will have a harsh effect on Nigeria economy and its people but it will be a worthwhile adventure if properly hand as a result of its many positive benefits.

REFERENCES

Adegbulugbe, A.O and A. Adenikinju (2008), “Energizing Vision 2020”. Paper Presented at the 1st International Conference of NAEE/IAEE at the Transcorp Hilton Hotel, 29th – 30th

Afonne E., (2011), “Politics of Oil Subsidy: The Cartel‟s Fraudulent Acts” ,Nigerian Newsworld, October 24, 15(34).

Anderson, K. and McKibben, W.J. (1997). “Reducing Coal Subsidies and Trade Barriers: Their Contribution to Greenhouse Gas Abatement.” Seminar Paper 97-07. Centre for International Economic Studies, University of Adelaide: Adelaide, Australia.

Birol, F., Aleagha, A.V. and Ferrouki, R. (1995). “The economic impact of subsidy phase out in oil exporting developing countries: a case study of Algeria, Iran and Nigeria.” Energy Policy . 23(3):209-215.

Tuesday, 1 March 2016

TYPES OF INVESTMENT

TYPES OF INVESTMENT

Stocks: Stocks are an equity investment that represents part ownership in a corporation and entitles you to part of that corporation’s earnings and assets. Common stock gives shareholders voting rights but no guarantee of dividend payments. When you buy stock, you buy a piece of the company and any rights that go along with partial ownership. The way to make a profit with stocks is to buy low and sell high or to receive stock dividends. Stocks can be quite risky.

Bonds: Bonds are loans, or IOUs, but you serve as the bank. You loan your money to a company, a city, the government – and they promise to pay you back in full, with regular interest payments. A city may sell bonds to raise money to build a bridge, while the federal government issues bonds to finance its spiraling debts. When you invest in bonds, you are actually lending money, usually to a government agency. Bonds are much less risky than stocks.

Real Estate: Real estate investment is the type of investment that generates income or is otherwise intended for investment purposes rather than as a primary residence. It is common for investors to own multiple pieces of real estate, one of which serves as a primary residence, while the others are used to generate rental income and profits through price appreciation. When you invest in real estate, you may be purchasing with the intent to re-sell at a profit, or you may be buying property to use as rental property. Traditionally considered a sound investment, the real estate market is currently a buyer’s market, so real estate investing is trickier right now.

Foreign Currency: The Forex market is a currency-trading market that is open all the time and accessible via the Internet. With Forex, you trade currency pairs for other currency pairs in the hope that you will trade for currency that has more value.

Mutual Funds: A mutual fund is a professionally-managed trust that pools the savings of many investors and invests them in securities like stocks, bonds, short-term money market instruments and commodities such as precious metals. ‘Mutual Fund’ An investment vehicle that is made up of a pool of funds collected from many investors for the purpose of investing in securities such as stocks, bonds, money market instruments and similar assets.

Certificates of Deposit: ‘Certificate Of Deposit – CD’ A savings certificate entitling the bearer to receive interest. A CD bears a maturity date, a specified fixed interest rate and can be issued in any denomination. CDs are generally issued by commercial banks and are insured by the FDIC.

Insurance: Some people choose to use life insurance as an investment. Many policies have investment properties, and an insurance agent or financial advisor can help you choose the right one.

Savings Accounts: Savings accounts offer very little return; in fact, although they are technically a form of investment, they barely qualify anymore. They are certainly a very good way to teach your kids the process of saving, however.

Of course there are other different forms of investment, such as investing in a start up company or some other form of business. But as you can see a variety of types of investment can add spice to your financial future.

Direct and Indirect Investment - Advantages and Disadvantages

Direct and Indirect Investment – Advantages and Disadvantages

INTRODUCTION

In an economic sense, an investment is the purchase of goods that are not consumed today but are used in the future to create wealth. In finance, an investment is a monetary asset purchased with the idea that the asset will provide income in the future or appreciate and be sold at a higher price.

When considering investing in property, one should choose between direct investment (owning one or two properties that are physically rented out and managed) or indirect investment (shares in a property loan stock or unit trust company).

Either can be rewarding, but an investor must choose the investment vehicle carefully and plan properly, says Michael Bauer, general manager of IHFM, a property management company.

DIRECT INVESTMENT

Direct investment is defined by the International Monetary Fund (IMF) as “Investment that is made to acquire a lasting interest in an enterprise operating in an economy other than that of the investor, the investor’s purpose being to have an effective voice in the management of the enterprise.” In practice, this translates to an equity holding of 10 percent or more in the foreign firm. For example, the investor who decides to invest in a toll road is a direct investor.

ADVANTAGES OF DIRECT INVESTMENT

  1. Greater potential for capital appreciation. The goal is to make money.  Direct real estate offers the best means of maximizing returns through greater potential capital appreciation from increased property values captured when properties are sold.
  2. Better tax benefits. The goal is to shelter one’s income once one has earned it.  Direct real estate offers the best shelter through greater tax benefits.  Unlike REITs, direct investments can pass through tax losses, which may then be used to offset taxable gains.  Direct real estate investment can be particularly appealing to accredited investors.
  3. Superior portfolio diversification.  The goal is to protect one’s assets through diversification.  Direct investment offers the best diversification benefit.  While REITs are commonly marketed as having a low correlation to the stock market, direct investments have an even lower factual correlation.

The advantage of owning a property outright and not in partnership with anyone is that it is yours and you can gear up to 100 percent of the investment (which means you own property without equity).

You earn the future rewards of that property and have 100 percent decision making ability on that property.

The disadvantage is that the risk is 100 percent yours – in terms of financial market risk (interest rates), business risks, and the risk of default when you have tenants.

INDIRECT INVESTMENT

Indirect investment is a way of investing in real estate without actually investing in the property. Indirect investment can be done in many ways, including securities, funds, or private equity. Most investors interested in indirect investment would do so through a company or advisor who has experience in this type of investing.

Indirect property investment is also defined as the acquisition of participating interests through the main stock exchange or during before hours-trading or Over the Counter (OTC), where the investor is only interested in property shares or indirectly interested in so-called “listed real estate”.

An indirect investment is a type of investing opportunity that does not require the actual purchase of the asset that ultimately generates the return. This type of arrangement is often associated with investing in real estate ventures, typically by purchasing stocks issued by a real estate company that in turn purchases and maintains the properties generating the dividends issued to the shareholders. There are a number of benefits to indirect investment, including the ability to avoid having to be directly involved in the management and upkeep of the assets involved.

Advantages of indirect investment

Indirect property investment has the following advantages:

1. Shares / Shares in funds

  • General Remarks
  1. Investment with low levels of capital expenditure as well
  2. Investment diversification (shares, funds, bonds)
  3. No involvement in refinancing, facility management, real estate management and end-users (tenants, lessees etc.)
  4. Comparability / benchmarking
  5. Liquidity of participating interests » sale on the stock market
  6. Improved performance / higher yields (professional real estate management and facility management
  7. Performance monitoring by other investors, analysts and media
  8. Income stream
  • For property companies limited by shares (listed on the stock market)
  1. Property shares may be bought and sold on the stock market at any time
  2. Visibility through option to publish real estate
  • For shares in property funds
  1. Return option
  2. Investor protection through investment rules and supervision
  3. Property bond option
  4. Market making opportunities for trading in shares in property funds
  5. Visibility through option to publish real estate indices 2. Companies

Disadvantages

1. Shares / Shares in funds

  • General Remarks
  1. Dependence on the professionalism of the fund management
  2. Dependence on the protection of minority holdings and its effectiveness
  3. Complete transparency
    1. of mutlisectional structures, profit transfers possible
    2. Clarification of the structures and procedures is necessary
  • For property companies limited by shares
  1. Risks inherent in company purpose (no restrictions on holding and trading in real estate, e.g. additional purpose as a general undertaking or total solution provider and as a property developer [e.g. Allreal AG]
  2. No investment rules (in contrast to the mutual property fund, property OEICs and property CEICs)
  3. Voting shares for promoter as reason for not participating in the vehicle
  4. Group-related subordination and resultant risks
  5. Clarify group structure
  • For property funds
  1. Cost intensity (marketing costs [portfolio management commission [also retrocessions], subject to marketing outlay], fund management fees, depository bank, real estate management and so on)
  2. Liquidity issues (insolvency of unsellable real estate)
  3. Shares are only taken back at the end of the financial year, every 12 months (exceptions are possible)
  4. Closure of fund / compulsory liquidation

The differences between direct and indirect property investment?

Direct investment in property refers to when you buy the whole or part of a physical property. As a process, this is not as easy or as quick as investing in equities or bonds, as it requires more time and more capital.

As a property owner you receive rent directly from your tenant, and you can realise gains or losses from the sale of the property. As a landlord you have additional responsibilities for the management of the property. Some of these require specific and specialist knowledge, such as that held by a chartered surveyor. while

Indirect property investment involves investing in the skills and expertise of other people, such as property or fund managers. There are a number of different ways of investing indirectly in property (see the ‘How can I invest in property?’ section). One of the most common routes into the property market, particularly for commercial property, is through collective investment schemes (such as property funds), where investors’ funds are pooled together.

Investors need to be aware that making indirect investments is likely to mean the performance of their investment vehicle is not wholly related to the performance of the property or properties contained within the vehicle. In addition, the tax treatment of indirect investment vehicles may be an issue. You need to be aware of the risks involved, and you should always seek financial advice where required.

For more information on indirect investment see the ‘How can I invest in property?’ section.

 Factors to consider when choosing between direct and indirect investment?

The choice between making an indirect or direct investment tends to be based on two main factors:

The first factor is cost, or the amount of money an investor has available to invest. Most individuals simply can’t afford to buy an entire commercial property, meaning that collective investment may be the only option for them in this instance.

The second factor is risk – specifically, the risk of putting a very large investment into an individual property, or into a small number of individual properties, rather than spreading the risk through a collective investment scheme, which may invest in many different properties, possibly even in different countries.

For those people interested in residential investment, there are fewer professionally managed collective investment schemes available, and investors have typically chosen individual buy-to-let properties as their preferred investment vehicle. However, these investors still need to be aware of the risks involved in concentrating their investments in one place, as opposed to diversifying their investments.

REFERENCES

Aitken, Brian J., and Ann E. Harrison. (1999). `Do Domestic Firms Benefit from Foreign Direct Investment? Evidence from Venezuela’, American Economic Review, 605–618.

Angelucci, M., and De Giorgi, G. (2009). `Indirect Effects of an Aid Program: The Case of Progresa and Consumption’, American Economic Review, 99, 486–508.

Tuesday, 23 February 2016

HISTORICAL BACKGROUND OF ABUJA MUNICIPAL AREA COUNCIL

HISTORICAL BACKGROUND OF ABUJA MUNICIPAL AREA COUNCIL

This is a brief historical background of Abuja Municipal Area Council (AMAC), AMAC created on the 1st October 1984 located on the eastern wing of federal capital territory. The bulk of federal institution, ministries, embassies are located within the confines of the Area council. The area council is accessible by land, air and telecommunication. The Nnamdi Azikwe International Airport operate international and domestic flights.

The area council is also accessible from other part of the country by road through Suleja road on the North, on the east through arterial Keffi – Nyanya road and through the Lokoja Gwagwalada road on the west.

AMAC provide both indigenous and foreigner investor ample investment opportunities such as mineral resources by solid mineral sector e.g. marble and mica which can be used in the building industry, iron are in technology, and clay in building, pottery and ceramics and with the availability of cereals such as beans, rice, millet, beniseed, guinea corn, flour mills.

Study shows that AMAC is blessed with vast arable land and rich soil. The area council falls within the highest tuber production belt-with huge population AMAC indeed provides very large market for goods and services also AMAC as a fast growing city, construction companies can benefit immensely in the engineering / construction sub-sector with a daily influx of people into the city transportation, banking, insurance and other social services can thrive very well.

The Abuja municipal area council which comprises of twelve wards namely; city center, Garki, Gui, Gwarinpa, Jiwa, Karshi, Kabusa, Karo, Nyanya, Oronzo and Wuse and each of these wards are represented by an elected councilor. The councilor form the legislative arm of the area council. The executive arm comprise of an elected chairman and a vice together with an appointed secretary and other supervisory councilors and special adviser. The headquarter is located at Garki and has an area of 1,769 (sq km).

Monday, 22 February 2016

Role of Personnel Manager in a Company

Role of Personnel Manager in a Company

INTRODUCTION

Personnel Manager at Coca Cola Company focuses on the acquisition and retention of highly skilled and knowledgeable employees so that it can maintain its top position in the market. It treats these resources as an asset. It provides such conditions of employment and procedures that enables all employees to develop a sense of unity with the enterprise and to carry out their duties in the most willing and effective manner.

RESPONSIBILITY OF PERSONNEL MANAGER OF COCA COLA COMPANY

  1. Recruitment: It is the core responsibility of personnel manager in recruitment of people possessing requisite knowledge, skills and experience into vacant position in the establishment. Personnel managers use his experience to good effect while laying down lucrative career paths to new recruits without, increasing the financial burden to the company.
  2. Administrative expert: The administrative role of an personnel Manager is heavily oriented to processing and record keeping. Maintaining employees file and human resource related databases processing employee benefit claims, answering queries regarding leave, transport and medical facilities, submitting required reports to regulatory agencies are examples of the administrative nature of human resource management.
  3. Policy maker: The human resource manager helps management in the formation of policies governing talent acquisition and retention, wage and salary administrative welfare activities, personnel records, working conditions etc. He also helps in interpreting personnel policies in an appropriate manner.
  4. Advisor: It is said that personnel management is not a line responsibility but a staff function. The personnel manager performs his functions by advising, suggesting , counseling and helping the line managers in discharging their responsibilities relating to grievance redressal, conflict resolution, employee selection and training . Personnel advice includes preparation of reports, communication of guidelines for the interpretation and implementation of policies, providing information regarding labor laws etc.
  5. Counselor: The personal manager discusses various problems of the employees relating to work, career their supervisors, colleagues, health, family, financial, social etc and advises them on minimizing and overcoming problems if any.
  6. Welfare officer: Personnel manager is expected to be the Welfare Officer of the company. As a Welfare officer he provides and maintains canteens, hospitals, crèches, educational institutes, clubs, libraries, conveyance facilities, co-operative credit societies and consumer stores. Under the Factories Act, Welfare officers are expected to take care of safety, health and welfare of employees.
  7. Legal consultant: Personnel manager plays a role of grievance handling, settling of disputes, handling disciplinary cases, doing collective bargaining, enabling the process of joint consultation interpretation and implementation of various labor laws, contacting lawyers regarding court cases, filing suits in labor courts, industrial tribunals, civil courts and the like.
  8. Operational Roles: These roles are tactical in nature and include recruiting, training, and developing employees coordinating HR activities with the actions of managers and supervisors throughout the organizations and resolving differences between employees.
  9. Trainer developer motivator: Apart from talent acquisition talent retention is also important. To this end, HR managers have to find skill deficiencies from time to time, offer meaningful training opportunities, and bring out the latent potential of people through intrinsic and extrinsic rewards which are valued by employers.
  10. Coordinator /linking pin: The personnel manager is often deputed to act as a linking pin between various divisions / departments of an organization. The whole exercise is meant to develop rapport with divisional heads, using PR and communication skills of HR executives to the maximum possible extent.

 

REFERENCES

Role of Personnel manager retrieved from: http://www.preservearticles.com/ 2012030124229/ what-are-the-duties-of-a-personnel-manager.html.

PROBIOTICS - NATURE, SOURCE, BENEFITS AND SIDE EFFECTS

PROBIOTICS – NATURE, SOURCE, BENEFITS AND SIDE EFFECTS

INTRODUCTION

Probiotics are microorganisms that offer some form of health benefit to the host – they can be found in various different foods. Probiotics are believed to play very important roles in regulating proper intestinal function and digestion – by balancing intestinal microflora.

Probiotics are live bacteria and yeasts that are good for your health, especially your digestive system. We usually think of bacteria as something that causes diseases. But your body is full of bacteria, both good and bad. Probiotics are often called “good” or “helpful” bacteria because they help keep your gut healthy.

Probiotics are naturally found in your body. You can also find them in some foods and supplements.

It’s only been since about the mid-1990s that people have wanted to know more about probiotics and their health benefits. Doctors often suggest them to help with digestive problems. And because of their newfound fame, you can find them in everything from yogurt to chocolate.

These ‘good bacteria’ are considered to be “live microorganisms which when administered in adequate amounts confer a health benefit on the host”, according to the World Health Organization.

Probiotics are normally consumed in fermented foods with active live cultures such as yogurt.

Probiotics are also available in supplement form as capsules, liquid and chewables. There are many different strains of probiotics, but the most common strains available today in are Lactobacillus and Bifidobacterium.

TYPES OF PROBIOTICS

Many types of bacteria are classified as probiotics. They all have different benefits, but most come from two groups. Ask your doctor about which might best help you.

  1. Lactobacillus. This may be the most common probiotic. It’s the one you’ll find in yogurt and other fermented foods. Different strains can help with diarrhea and may help with people who can’t digest lactose, the sugar in milk.
  2. Bifidobacterium. You can also find it in some dairy products. It may help ease the symptoms of irritable bowel syndrome (IBS) and some other conditions.

NATURE OF PROBIOTIC STRAINS

Probiotic cultures naturally occur in certain fermented foods. Below is a list of different strains of probiotic bacteria.

  • Bacillus coagulans GBI-30, 6086
  • Bifidobacterium animalis subscp. lactis BB-12
  • Bifidobacterium longum subsp. infantis 35624
  • Lactobacillus acidophilus NCFM
  • Lactobacillus paracasei St11
  • Lactobacillus johnsonii La1
  • Lactobacillus plantarum 299v
  • Lactobacillus reuteri ATCC
  • Lactobacillus reuteri Protectis
  • Saccharomyces boulardii.

SOURCE OF PROBIOTICS

Foods that contain natural probiotics:

  • Yogurt
  • Kefir
  • Aged cheeses
  • Kimchi
  • Sauerkraut
  • Miso
  • Tempeh
  • Some soy beverages.

There are also products available which are probiotic-fortified such as juices, chocolates, flour and cereal.

BENEFITS OF PROBIOTICS

It should be noted that many of the possible health benefits of probiotics still require more scientific research to be proven.

  • Diarrhea: Certain strains of probiotics have demonstrated positive results in treating diarrhea and gastroenteritis. According to a report published in the Journal of Pediatric Gastroenterology and Nutrition, probiotics are “useful in the prevention or treatment of several gastrointestinal disorders”, such as infectious diarrhea, antibiotic diarrhea, and traveler’s diarrhea.
  • Brain function: Probiotics may be beneficial for brain function. Researchers at UCLA found that brain function improved among healthy women who regularly consumed probiotic-containing yogurt.
  • Cholesterol: Research presented at the American Heart Association’s Scientific Sessions in 2012 revealed that a formulation of Lactobacillus reuteri NCIMB 30242, is able to reduce blood levels of LDL or “bad” cholesterol.
  • Blood pressure: The consumption of probiotics may effect a modest benefit in helping to control high blood pressure. Some studies have found that milk fermented with strains of LAB may help lower blood pressure.
  • Irritable bowel syndrome: There is growing evidence that probiotics can help treat IBS (irritable bowel syndrome).
  • Infection: Probiotic Bacteria Can Protect Against Bacterial Infection.
  • Psoriasis and Chronic Fatigue Syndrome: Probiotics have the benefits for patients with psoriasis and chronic fatigue syndrome. Probiotics may help people with irritable bowel syndrome, although uncertainty remains around which type of probiotic works best, and around the size of the effect. No good evidence indicates taking probiotics helps maintain remission from ulcerative colitis.
  • Immune function and infections: Some strains of LAB may affect pathogens by means of competitive inhibition (i.e., by competing for growth) and some evidence suggests they may improve immune function by increasing the number of IgA-producing plasma cells and increasing or improving phagocytosis, as well as increasing the proportion of T lymphocytes and natural killer cells. Clinical trials have demonstrated that probiotics may decrease the incidence of respiratory-tract infections and dental caries in children. LAB products might aid in the treatment of acute diarrhea, and possibly affect rotavirus infections in children and travelers’ diarrhea in adults, but no products are approved for such indications.
  • Vitamin production: Probiotic treatment has been studied as a means of addressing maladies associated with vitamin deficiency, e.g., of vitamin K, folic acid, and vitamin B12.
  • Eczema: Probiotics are commonly given to breast-feeding mothers and their young children to prevent eczema, but some doubt exists over the strength of evidence supporting this practice.

SIDE EFFECTS

In some situations, such as where the person consuming probiotics is critically ill, probiotics could be harmful. In a therapeutic clinical trial conducted by the Dutch Pancreatitis Study Group, the consumption of a mixture of six probiotic bacteria increased the death rate of patients with predicted severe acute pancreatitis.

In a clinical trial aimed at showing the effectiveness of probiotics in reducing childhood allergies, researchers gave 178 children either a probiotic or a placebo for the first six months of their lives. Those given the probiotic were more likely to develop a sensitivity to allergens.

Some hospitals have reported treating Lactobacillus septicaemia, which is a potentially fatal disease caused by the consumption of probiotics by people with lowered immune systems or who are already very ill.

Probiotics taken orally can be destroyed by the acidic conditions of the stomach. A number of microencapsulation techniques are being developed to address this problem.

One 2009 paper cited a 2007 study in chickens as a support for causally linked probiotic products such as yogurts with obesity trends. However, this is contested as the link to obesity, and other health-related issues with yogurt may link to its dairy and calorie attributes.

Some experts are skeptical on the efficacy of many strains and believe not all subjects will benefit from the use of probiotics.

REFERENCES

GILLILAND, Stanley E, MORELLI, Lorenzo, REID, Gregor. “Health and Nutritional Properties of Probiotics in Food including Powder Milk with Live Lactic Acid Bacteria“. Food and Agriculture Organization of the United Nations. World Health Organization. Accessed October 14th 2013.

Vanderhoof JA, Young RJ. “Use of probiotics in childhood gastrointestinal disorders”. J Pediatr Gastroenterol Nutr. 1998 Sep;27(3):323-32. Accessed October 13th 2013

Szajewska H, Kotowska M, Mrukowicz JZ, Armańska M, Mikołajczyk W. “Efficacy of Lactobacillus GG in prevention of nosocomial diarrhea in infants”. J Pediatr. 2001 Mar;138(3):361-5. Accessed October 13th 2013.

Mary Ellen Sanders. “Considerations for Use of Probiotic Bacteria to Modulate Human Health”. The Journal of Nutrition. February 1, 2000 vol. 130 no. 2 384. Accessed October 13th 2013.

undefinedSOLD BY: Enems Project| ATTRIBUTES: Title, Abstract, Chapter 1-5 and Appendices|FORMAT: Microsoft Word| PRICE: N5000| BUY NOW |DELIVERY TIME: Immediately Payment is Confirmed

undefinedSOLD BY: Enems Project| ATTRIBUTES: Title, Abstract, Chapter 1-5 and Appendices|FORMAT: Microsoft Word| PRICE: N5000| BUY NOW |DELIVERY TIME: Immediately Payment is Confirmed