Saturday, 5 November 2016

WHO IS AN AUDITOR?

WHO IS AN AUDITOR?

According to the Oxford Advance learners Dictionary 6th Edition defined an Auditor as “somebody who verifies accounting data, determines the accuracy and reliability of accounting statements and reports, and then reports upon its efforts.

He is an independent person who reports on the truth and fairness of a financial statement. Thus, the internal auditor(s) of the company who must be a qualified accountant is always charged with the duty of providing a complete and continuous audit or the accounts and records of revenue, expenditure, plant, allocated and unallocated stores, contracts and the internal controls relating to the financial operations of the company.

QUALIFICATION OF AN AUDITOR

Of Colossal importance of paramount necessity is it, and justifiable too to state emphatically that one of the major and indispensable qualification of an auditors is that;

Auditors must undergo professional training and must be registered with an accounting body such Institute of Chartered Accountant of Nigeria (ICAN), ANAM etc at stipulated in the Company Allied Matter Act (CAMA) 1990.

APPOINTMENT OF AN AUDITOR

According to section 358 of Company and Allied Matter Act (CAMA) 1990, the stipulations as regards to the appointment an auditors are as follows;

i. An auditors may/could be appointed by the company if there is casual vacancy in the position of an auditor.

ii. Another reason according the provisions of the said section are when the in ambient, acting auditor dies before the expiration of his tenure.

iii. Yet another reason is when the auditor resign willing.

iv. When the members agree to remove the incumbent auditor before the expiration of his tenure.

v. An auditors may be appointed when at the Annual General Meeting (AGM) of the company, the members, shareholders agree to appoint a new auditor or reappoint the incumbent one.

Thursday, 3 November 2016

PROFIT AND PROFITABILITY

PROFIT AND PROFITABILITY

Sometimes, the term ‘profit’ and ‘profitability’ are used interchangeably. But in real sense, there is a difference between the two. Profit is an absolute term, whereas, profitability is a relative concept. However, they are closely related and mutually interdependent having different roles in business.

Pandey (2010), defines profits as the difference between revenue and expenses over a period of time( usually one year) while profitability refers to the operating efficiency of the enterprise. It is the ability of an enterprise to make profit on sales. It is the ability of an enterprise to get sufficient return on the capital and the employees used in the business operation.

Profit is the test of efficiency and a measure of control to the owners, a measure of worth of investments to the creditors, the margin of safety to the government, a measure of taxable capacity and a basis of legislative action to the country. Profits is an index of economic progress. National income generated and the rise in the standard of living while profitability is an outcome of profits. In other words, no profit drives towards profitability.
Firms having same amount of profits may vary in terms of profitability. That is, profits in two separate business concern may be identical, yet, many a times, it usually happens that there profitability varies when measured in terms of size of investments.

VARIANCE ANALYSIS

VARIANCE ANALYSIS

Variance analysis is defined by Ama (2001) as the process of analyzing the total difference between planned and actual performance into its constituent parts, variance analysis can also be defined as a sign post which alerts management to the need for inquiry into cause of off standard results.

Eze and Ani (2009) indicates that the variance analysis involves the analysis of the causes of variance on three major elements of costs viz; material, labor and overhead. The basic variances will be computed by looking at the components of the total cost of material, labor and overheads. These components are quantity and money value for materials while the components of labor and overhead costs are hours worked and money value. Consequently, there are possible ways of analyzing the basic variances;

Material cost variance (MCV)

It is a principal material variance which occurs when the actual material cost is at variance from the standard material cost, in fact, it is the difference between the standard cost for material and actual material costs.

It is determined thus;
MCV= actual cost –standard cost

(AQ X AP) – (SQ – SP)

Where;

AQ= actual quantity

AP = actual price

SQ = standard quantity

SP = standard price

Direct material price variance (DMPV)

This is caused by paying a higher or lower price than the standard price set for material, while the actual quantity hold constant. In equation form, the material price variance is;
DMPV = (AP – SP) AQ

Direct material usage variance (DMUV)

This is caused by using more or less of the standard amount of materials to produce a product or complete a proves where the standard cost holds constant.
In equation form, the material usage variance is
DMUV = (AQ – SQ) SP

Direct labor total variance (DLV)

This is a principal variance. It occurs as a result of the difference between the actual wage pay and standard wage pay.
DLV = (SH X SR) – (AH X AR)

Direct labor rate variance (DLRV)

This is caused by paying a higher or lower rate of pay than standard to produce a product or complete process. The direct labor rate variance is compute by multiplying the difference between the actual direct hour rate paid (AR) and the standard direct labor rate allowed (SR) by the hours of direct labor services required (AH).

In equation form, direct labor rate variance is
DLRV =(AR – SR) AH

Direct labor efficiency variance (DLEV)

It is caused by using more or less of than the standard amount of direct labor hours to produce a product or complete a process. The direct labor efficiency variance is computed by multiplying the difference between the actual direct labor hours required (AH) and the standard direct labor allowed (SH) by the standard direct labor hour rate per hour (SR).

In equation form,
DLEV = (AH –SH) SR

Variable overhead expenditure variance

It is the difference between the actual variable overheads incurred and the allowed variable overhead based on the actual hours worked.
VOEV= Actual variable overhead- (actual labour hour x overhead absorption rate)

Variable overhead efficiency variance

This is the difference between the allowed variance overhead and the absorbed variable overhead.

VOEV= (Actual labour hours – standard labor hours) x variable overhead expenditure rate

Fixed overhead expenditure variance

This is the difference between the actual fixed expenditure attributed and charged to a particular production period and the budget cost allowance for that production period. Alternatively, it is the difference between actual fixed overhead and allowed or budgeted fixed overheads.
Fixed overhead expenditure variance= Actual variable overhead x (actual labour hour x variable overhead absorption rate).

Fixed overhead efficiency variance

This is part of the fixed production overhead volume variance. It is the difference between the actual direct labor hours worked times by the standard hourly absorption rate; and the standard cost absorbed in the production accomplished.

Fixed overhead efficiency variance= Actual labour hours – standard labour hours) x variable absorption rate

Fixed overhead capacity variance :

This is part of the fixed production overhead volume variance. It is the difference between the actual direct labor hours worked times by the standard hourly absorption rate at the budgeted cost allowance for the period.

Fixed overhead capacity variance = (actual hours x fixed overhead absorption rate) – budgeted expenditure

TYPES OF STANDARD

 TYPES OF STANDARD

1. IDEAL STANDARDS

This may be described as an established standard specifically designed on the basis of maximum productive capacity of the organization i.e. standard established without providing adequately for any negative factor that may inhibit the attainment of the standards. For example, labor standards established without the provision for lateness, absenteeism, industrial action, annual leave, maternity leave etc.

2. ATTAINABLE STANDARD

Also referred to as practical standards. This will represent an established standard specifically premised on what is considered practicable within the organization. Practical standards are established with adequate provision for negative factors that may affect the attainment of the established standards. For example, in establishing production standards, adequate provision is given to ideal time or loss of production due to machine breakdown, loss of power, lack of raw materials, repairs and maintenances etc.

3. CURRENT STANDARDS

This will be described as an established standards specifically based on the prevailing working condition within the organization or the industry at large. Current standards are however subject to frequent changes in order to reflect the current position within the organization.

4. BASIC STANDARDS

This will represent an old established standards designed principally to satisfy a given objective. Basic standards are not subject to frequent alterations, therefore, outdated in nature.

Wednesday, 2 November 2016

INVESTIGATIVE AUDITS

INVESTIGATIVE AUDIT

Ezeilo (2010) defined investigative audit as “audit that are performed to investigate incident of possible fraud or misappropriation of institution funds.” It is usually seen as an audit that takes place as a result of report of unusual or suspicious activity on the part of an individual or a department.

It usually focuses on specific aspects of the work of a department or individual in relation to fraud and corruption, so as to examine how the systems can be reinforced for fraud prevention and detection.

Ezeilo (2010) further explains that investigative audit is a valuable part of audit toolkit because it focuses on the risks that threaten achievement such as risk of fraudulent claims for expenditure, fraudulent provision of services to an organization or fraud and evasion of revenue payments.

It also concentrates on the standards of financial management, implementation of internal control regimes and electronic services.

It is also worth noting that this audit differs from other audits because they are normally conducted without first notifying the personnel who may be affected by the findings.

In carrying out this investigation, the forensic auditors who are usually referred to as investigative auditors have certain principal tools used in investigating, and they include;

i. Information (informants)
ii. Interviews (witnesses)
iii. Interrogation (suspects)
iv. Instrumentation (crime laboratory, comparison microscopes, polygraph etc.).

Out of all these tools, information contribute to the solution of crime more than the other tools, although there are some evidence that instrumentation could be used more frequently and more effectively to solve a greater number of crimes.

FORENSIC AUDITING

FORENSIC AUDITING

As a result of all these things, the auditors coming together decided to have a special people to do an in-depth study of what is happening. The need to incorporate expertise that will be charged with responsibility of carrying out judicial functions together with accounting skills instigate forensic auditing.

Mobile greek (2011), defined forensic auditing as an examination and evaluation of a firm’s or individual financial information for use as evidence in court. It can be conducted in order to prosecute a party for fraud, embezzlement or other financial claims.

Forensic auditing is defined as “the application of auditing skills to situations that have legal consequences”. Chatterji (2009). It is also seen as “an examination and evaluation of a firm’s or individual’s financial informations for use as evidence in event”. During a forensic auditing, professionals compile and assess financial information to be used in legal proceedings, whereas the auditing is conducted by forensic auditors who rely on the principles of law, business and ethics. These reports are sometimes used to prepare legal defenses as well as prosecuting a party for fraud, embezzlement or other financial claims. Investopedia (2011).

Forensic auditing has been seen as a specialization within the field of accounting, whereby forensic auditors provides experts testimony during trial proceedings. Nigrini (2011).

In relation to this, Scott (2008) defined forensic defined forensic auditing “as a special practice of accounting that involves using auditing techniques to specifically look for financial misconduct”.

APPLICATION OF FORENSIC AUDIT

Due to the increase of fraudulent practices, there has been increasing risk of auditing skills to prevent fraud by identifying and rectifying situations which could lead to fraud been perpetrated.

It has been observed that the cost of implementing procedures to monitor and restrict the fraudulent acts are far less than the fraud risk that companies face each day. Chatterji (2007).

It will be useful therefore to discuss forensic as being either “proactive or reactive”.

Proactive Forensic: This audit helps businessmen to ensure that there processes stay robust, and it can be viewed from different aspects depending on its application. Ezeilo (2010).

i. Statutory Audit:

In this case, auditing standard prescribe that internal control should be studied and evaluated in respect of safeguarding assets and resources when performing regularity and financial audit, and in assisting management in complying with laws and regulations when performing compliance auditing. Asosai (2011).

ii. Regulatory Compliance:

This technique are usually used by government departments or agencies to access compliance with regulations governing payments or grants or subsides. Performance auditors could also use this technique while auditing such governmental programs. Ezeilo (2010).

iii. Diagnotic Tool:

Forensic auditing can be used either by management or by auditors to carry out general reviews of activities to highlight risk arising either out of fraud or from any other source, with they purpose of initiating focused reviews on particular areas and targeting specific threats to the organization. Asosai (2011).

iv. Investigation of Allegation:

The techniques of forensic auditing are useful in this case, in the sense that various complaints and allegations could be used as a guild for gathering evidence used in investigation. This is cited as being proactive because it is widely felt that the existence of a system of investigation in such cases is significant deterrent to fraud and corruption. Ezeilo (2010).

Reactive Forensic:

They objective of this audit is to investigate cases of suspected fraud so as to prove or disprove the suspicious and if proven, the person involved is to be identified, the findings are to be supported by evidence, after which it is presented in an acceptable format in any subsequent discipline or criminal proceedings. Ezeilo (2010).

Due to the processes involved in reactive forensic audit, it is important therefore to keep in view the following:

i. Working relations with the investigating prosecuting agencies.

ii. Authorization and control of the audit investigation.

iii. Documentation of relevant information and safeguarding all prime records pertaining to the case.

iv. Rules of evidence on government admissibility or authentication of records.

v. Confidentiality of evidential document.

vi. Evaluation of the evidence to asses whether the case is sustainable.

vii. Legal advice where appropriate.

viii. Reporting the findings in a manner that needs legal requirements. Chatterji (2007).

FRAUD RISK MANAGEMENT

FRAUD RISK MANAGEMENT

Fraud risk management is a clinical process that requires constant application and effective maintenance. An effective fraud risk management provides an organization with tools to manage risk in a manner consistent with regulatory requirements as well as the entity’s needs and expectations. In other to achieve this, management is advised to identify their scope and objectives and set targets for improvement together with steps to achieving them. Ekeigwe (2010).

Ekeigwe (2010) also states that management is expected to develop a broad ranging program that encompasses control, deploys a strategy and process for implementing the new controls, and assesses the existing controls in connection to legal and regulatory frameworks, so as to prevent, detect and response to incidents of fraud or misconduct.

PRINICIPLES OF FRAUD RISK MANAGEMENT

The principles based approach effective for establishing an environment with fraud risk management was outlines by Ekeigwe (2010) to include:

  1. Fraud risk management which should be in place, including a written policy to convey the expectation of the board of directors and senior management regarding managing fraud risk.
  2. Fraud risk exposure that should be assessed periodically by the organization to identify specific potential schemes and events that the organization needs to mitigate.
  3. Prevention techniques to avoid potential key fraud risk events should be established, where feasible, to mitigate possible impacts on the organization.
  4. Detection techniques should be established to uncover fraud events when preventive measures fail or unmitigated risks are realized.
  5. A reporting process should be in place to solicit inputs on potentials fraud and a coordinated approach to investigation. Then correction action should be used to help ensure that potential fraud is addressed appropriately and timely.

FRAUD - Meaning, Element and Types

FRAUD

The term “fraud” is one which is used in variety of meanings. It is usually used as;

a. A tort at common law.
b. A name for false representation.
c. A name for such unfair dealings as it will induce a court of equity to refuse specific performance against the party who has been deceived by such fraud or in some cases, to grant rescission upon the complainant’s application.

According to Adeniji (2010), frauds refers to “an Intentional act by one or more individuals among management, employees, or third parties, which results in a misrepresentation of financial statements”. It may also involve,

  • Manipulation, falsification or alteration of records or documents.
  • Misappropriation of assets.
  • Suppression or omission of the effects of transaction from records or documents.
  • Recording of transactions without substance.
    Misapplication of accounting policies.

Adeniji (2010) further explains that among the various definitions of frauds, the most common is that “fraud is a generic term, and embraces all the multifarious means which human ingenuity can devise, which are resorted to by one individual, to get an advantage over another by false representations. No definite and invariable rule can be laid down as a general preposition in defining fraud, as it includes, surprise, lickery, cunning and unfair ways by which another is cheated. The only boundaries defining it are those which limit human knowing”.

Frauds is also defined “as the crime or offense not deliberately decreeing another in order to damage them usually to obtain property or services injustice”. Ekeigwe (2010).

Also Kano (2004), Opines that “frauds and forgery are jointly defined as irregularities involving the use of criminal detection to obtain unjust or illegal advantage”.

ELEMENTS OF FRAUD

All kinds of frauds including financial statement fraud are outcome of at least three (3) elements which include, pressure, opportunity and rationalization. These three elements make up what we call the fraud triangle.
1. Pressure or motive: it is the need for committing frauds.
2. Rationalization: The mindset of fraudster that justifies them to commit fraud.
3. Opportunity: The situation that enables frauds to occur and this often happens when internal control is weak or non-existent.

TYPES OF FRAUD

The different types of frauds which includes: Employee embezzlement, management frauds, investment scams, vendor frauds, customer frauds, miscellaneously frauds was categorized into three (3) broad headings by Keshi (2011), as internal fraud, external fraud and corruption or collusion.

Internal Fraud: This is the most common form of frauds found in organizations. The perpetrators of this kind of frauds are managers (i.e. top or middle management) and employees.

External Fraud: This is another form of frauds that is being perpetrated by those outside the organization, which may include customers or organized criminal.

Corruption or Collusion: This is one of the most difficult kind of frauds to recognize. It is frauds perpetrated within the corporation by an inside employee and an outsider.

The Nature and Concept of Public Enterprise

The Nature and Concept of Public Enterprise

Public enterprises have numerous definitions and there is no single generally acceptable definition of the concept. Sosna (1983) opined that there are many reasons why in developed capitalist countries, there is no single standard definition of public enterprises. Public enterprises were established at different periods, and each epoch naturally brought forth the types of public enterprises most clearly matching its own conditions.

It is therefore believed that the variation in definition are informed by the ideological, values, interests, dispositions and circumstances that brought public enterprises into existence. Whatever the controversy and the lack of uniformity might conjure up, we would however review the viewpoint of some scholars of public enterprises. For instance, Efange (1987) define public enterprises or parastatal as institutions or organizations which are owned by the state or in which the state holds a majority interest, whose activities are of a business in nature and which provide services or produce goods and have their own distinct management.

Obadan (2000), Obadan & Ayodele (1998) defined public enterprises as organizations whose primary functions is the production and sale of goods and/or services and in which government or other government controlled agencies have no ownership stake that is sufficient to ensure their control over the enterprises regardless of how actively that control is exercised.

The basic reason for establishing public enterprises in all economies has been to propel development. In the opinion of Obadan (2003), the case for public ownership has often been made on many grounds among which are: the persistence of monopoly power in many sectors ( meaning that certain market have the tendency to move towards monopoly power, especially when technological factors); freedom of government to pursue objectives relating to social equity which the competitive market would ignore, like employment and easy access to essential goods and services; capital formation particularly at early stages to develop Investment in infrastructure; lack of private incentives to engage in prospective economic ventures; certain goods that are of high social benefits are usually provided free or at a price below their cost and the private sector has no incentives to produce such goods hence the government must be responsible for their provision; the desire for the government to achieve redistribution by locating enterprises in certain sectors (areas) especially where private initiatives are low; and ideological motivation and the desire of some governments to gain national control over strategic sectors or over multi-national corporations whose interests may not coincide with those of the African countries or over key sectors for planning purposes.

Other factors that accelerated the growth of Nigeria’s public sector was the indigenization policy of 1972 as enacted by the (Nigerian Enterprises Promotion Decree). It was designed to control the commanding heights of the economy. The policy further provided the much needed legal basis for extensive government participation in the ownership and control of significant sectors of the economy. It also reinforced the increasing dominant of the public sector in the economy.

In spite of the impetus given to public enterprises especially in Nigeria some criticisms are leveled against them. Their problems are so enormous that even left the Nigerian public in a state of great disillusionment. These criticisms vary from lack of profitability and reliance on large government subsidies. Ogundipe (2002) once argued that between 1975 to 1999, government capital investments in public enterprises totaled about 43 billion Naira. In addition to equity investments, government gave subsidies of N11.5 billion to various state enterprises.

All these expenditures contributed in no small measure to increased government expenditures and deficits.

Similarly, public enterprises suffer from gross mismanagement and consequently resulted to inefficiency in the use productive capital, corruption and nepotism, which in turn weaken the ability of government to carry out its functions efficiently (World Bank, 1991). There are avalanche of literatures that point to the problems of public enterprises especially in Nigeria. They include, , Sanusi (2001), Obadan (2003), Jerome (2005).

TYPES OF BANK CREDIT

TYPES OF BANK CREDIT

The following are different types of bank credit:

1. LOAN AND ADVANCES
A) OVERDRAFTS: These are the most common and simplest forms of credit facilities. They are usually granted for working capital purposes and the amount outstanding is expected to fluctuate over the life of the facilities, depending on the borrower‟s working capital financing needs, at any material time.

Overdrafts permit the borrower to use those amounts required on a day to day basis, thus saving unnecessary interest charges. In accordance with general banking practice, overdrafts are repayable on demand and can be cancelled at the bank‟s option without prior notice to the borrower. The overdraft limit is usually communicated to the customer and this limit serves as the bank‟s reference point in all drawings by the beneficiary.

B) ADVANCES: An advance is a short-term credit which is granted for a definite period, usually between 30 and 180 days. They are usually granted for specific purposes, for example, payment of various collections, refinancing of maturing loans, project bridging finance, refinancing of letters of credit for project equipment imported etc. The exact maturity date of an advance is normally determined at the onset and this makes it possible for the project to have a lower interest charge on the advance due to the reduced risk (money rate and credit risk).

Short-term loans are also used in financing seasonal increases in working capital and also in temporary accommodations of a project capital expenditure needs, and other long-term commitments, pending final negotiation of long-term loan. Most times, short term loans are usually renewed at maturity. Banks predominantly extend substantial amounts of short-term loans to farming, manufacturing, small-scale project etc.

Short-term loans may be secured or unsecured. Banks extend secured loans to borrowers who have a high debt/equity ratio, or projects that have not established a record of satisfactory performance and stable earnings or generated enough sales revenue in relation to their capital. Large exposures are also often secured.

Unsecured loans, although disallowed by banking laws in Nigeria, are granted in exceptional cases to projects that are properly financed, have adequate capital and net worth, competent management, stable earnings, a record of prompt payment of obligations, and a bright future. Unsecured loans, however, often crystallize into bad debts in the Nigerian banking scene.

C) MEDIUM- TERM LOANS: These constitute important sources of intermediate funds for projects and businesses. Medium-term loans are usually granted for specific purposes such as investments, equipment financing, housing, share acquisitions, agricultural financing, construction etc.

A medium-terms loan is a facility with an original maturity of more than one year or a loan granted under a formal agreement (revolving credit or credits) on which the original maturity of the commitment is in excess of one year. Medium-term loans have maturities of between 1 and 5 years.

They are negotiated between a borrower and a lender and are most prevalent in industrial projects characterized by heavy fixed capital requirements. Most of the loans however are made to small projects and businesses which rely on these sources, due to their limited access to the capital market.

Medium-term loans provide flexibility for the user and are amortized in fixed instalments on a monthly, quarterly, semi-annual or even annual basis, as the case may be. The interest rates on this type of loan amongst other factors depend on the general level of interest rates prevailing in the market, the amount and maturity of the loan and the credit standing of the borrower. Generally, the interest rates is higher than in ordinary advances or short-term loans due to higher money and credit risks and the fact that it is less liquid.

Medium-term loans are usually supported by a loan agreement between the bank and the borrower. This agreement outlines the terms and conditions of the loan, and other important features such as:

1) Preamble which contains the parties to the loan and the purpose of the loan

2) Amount of loan

3) Tenor. The maturity of the loan is usually well specified.

4) Repayment schedule; term loans generally specify that a repayment schedule be in the form of an annuity.

5) Interest rate- this is usually specified and may range from fixed rates to floating rates

6) Security/ guarantee. There are usually specifications for collateral.
When a revolving credit agreement that does not require collaterals is converted into a term loan, the borrower may then have to secure the loan according to the conditions of the loan agreement.

7) Representations and warranties

8) Covenants of the borrower: This usually includes affirmative covenants, the negative covenant and other restrictive clauses. An example of a restrictive clause/negative clause are restrictions on the borrower from special actions such as increasing its dividend payments, making loans to its officers and /or directors and purchasing or leasing fixed assets etc.

9) Events of default/acceleration clause

10) Miscellaneous matters
Usually, a borrower is expected to execute series of promissory notes corresponding to each repayment date. Enforcement of repayment is thus facilitated and the parties tend to have a greater faith in the agreement

ADVANTAGES OF TERM LOANS
(i) Term loan affords the borrower the advantage of trading on its equity. This concept assumes that the profits on the borrowed funds exceed the cost of borrowing.

(ii) With a term loan, it is possible for the borrower to negotiate the provisions of the initial lending agreement directly with the lender.

D) LONG-TERM LOANS: Banks in Nigeria do not usually provide much of long-term loans. This is due to the nature of their deposit liabilities from where the loans are granted. Recently, however banks have been engaging in long-term lending through syndicated loan arrangements.

Long-term loans are usually provided by investment banks, development banks and various international lending agencies.

Long-term loans are granted for periods exceeding five years, and are usually provided for fixed capital requirements. They are amortized in fixed instalments like medium-term loans.

The interest rate on this type of loan is tied to market rates and usually is higher than other rates in the market, due to the higher risk exposures.

(2) SPECIAL CREDITS
These are special types of credit facilities extended by banks in favour of various projects and businesses. They are usually non-fund based and are classified as credit since they entail some risks on the part of the bank/financial institution providing the facility

(1) Public Works Bond: these are three types of public works bond.

(a) The Bid Bonds or Tender Bonds: The essence of bid bonds is to ensure that the party, to whom a project or contract has been awarded, will execute the contract successfully. The bid bond is called for the employer as soon as the contractor fails to accept the award. This is because failure to accept the terms of the contract may result in an additional cost of rewarding the contract to another contractor.

(b) Advance Payment Guarantees: most times, a bank is required to issue a guarantee on an advanced payment made to a contractor by the employer, prior to the commencement of the contract. The guarantee is in terms of the contractor‟s financial and technical standing.

(c) Performance bonds: banks issue this type of bond on behalf of their clients who have contracts. The bond provides a guarantee on the contractor‟s capability of handing the contract, his financial standing and credit rating.

(2) Customs and Excise Bonds: this type of bond is issued a by the bank to guarantee a third party ( usually a government organ) with regards to an importer‟s capability of making payment of customs duties (for imports) and excise duties ( for manufactured goods in Nigeria). As soon as the customer defaults, the bank would be held liable to pay the sum guaranteed.

(3) Bills of lading indemnities: A bill of lading is a quasi-negotiable document which confers title to goods. Banks usually issue a bill of lading indemnity to their customers, in cases where the goods imported into the country arrive before the importer (customer) receives the bill of lading. This indemnity issued will thus assist the customer in clearing the goods.
The bill of lading indemnifies the shipping company against any loss or subsequent claims on the ownership of the goods covered by the indemnity and usually the bank is primarily liable on the indemnity.

(3) DOCUMENTARY CREDITS
A documentary credit or letter of credit is a written commitment of one bank addressed to an identifiable party to pay the seller of goods or services, an agreed sum of money on condition that the seller produces documents evidencing that the goods have been shipped or that he has performed the services required of him. There are different types of documentary credits. These include: the revocable documentary credits, the irrevocable and confirmed credits. Others are revolving credits, red clause, „bank to bank‟ credit and stand-by letters of credit. For our purpose we shall concentrate on the following types.

a) Revocable Documentary Credit

b) Irrevocable, Unconfirmed Documentary Credit

c) Irrevocable Confirmed Documentary credit.

i. Revocable Documentary Credit: A revocable documentary credit allows the issuing bank to amend or cancel the credit without notice to the beneficiary (the seller) before he is paid.

ii. Irrevocable, Unconfirmed Documentary Credits: this represents a commitment by the issuing bank (usually the buyer‟s bank) to pay the seller, if the terms of the credit are met and it is usually not amended or cancelled without the seller‟s consent.

iii. Irrevocable and confirmed documentary credit: this type of documentary credit offers the best security for payment to the seller assuming he fulfils his part of the contract. In the arrangement, another bank (the confirming bank) commits itself to paying the seller, if all the conditions of the credit are fulfilled.

Documentary credits could also be categorized according to the terms of payment. Here, we could distinguish between sight credit, acceptance credits, deferred payment credit, red clause‟ credit and revolving credits.

(i) Sight credit- this is a situation where the beneficiary receives payment on presentation and examination of the documents.

(ii) Acceptance credit- In this type of credit, the beneficiary draws a time draft either on the issuing or confirming bank or on the buyer or another bank, as specified in the documentary credit. As soon as it is accepted by any of the parties above, the issuing and confirming bank guarantee payment of the instrument at maturity to any confide holder.

(iii) Deferred credit– in this form of credit, the issuing or confirming bank issues a written promise to make payment on due date. This contrasts with the acceptance credit since in the latter case; a draft is accepted upon presentation of properly confirmed documents. Here, there is an obvious advantage since the draft being a negotiable instrument, could be easily discounted.

(iv) “Red- clause” credit- this is a special type of advance credit. It authorizes the advising bank to advance a part of the credit amount to the beneficiary to enable him mobilize the merchandise.

(v) Revolving credit– this form of payment, arises where a buyer intends to place orders in excess of his requirements. The revolving credit is established stipulating intervals of delivery and thus guaranteeing payment of each delivery, assuming the terms of the credit are maintained.

The process of establishing a documentary credit involves two banks and two parties: the importer and exporter. It should be noted that banks adopt normal credit evaluation methods in granting these special credits. The basic requirements, most time, are the same as in normal loans and advances.

The two banks involved in documentary credit transactions consists of, first, the importers‟ bank also known as the opening (establishing) bank. There is also the confirming or notifying bank that is the exporter‟s bank.

REFERENCES

Bajcom, W. R. (1952). The ESUSU- A credit Institution of the Yoruba, “Journal of the Royal Auth, Institute LXXXII, I, PP 63-69.

Adekanye, f. (1986), The Element of Banking in Nigeria. U.K, Bedforddure, Gralam Burn.

Agene, C. E. (1995), the Principles of Modern Banking, Abuja, Gene Publications.

Ahmad, N.H., and Arih M. (2007), Multi-country study of Bank credit risk Determinants, International Journal of Banking and Finance, 5 (1), 135 – 152

Jhingan, M.L (2002), Macro Economic Theory: the Credit Creation 10th Edition, Delhi, Vrinda Publications (p) LTD.

SOURCES OF FUND IN THE HOSPITAL

SOURCES OF FUND IN THE HOSPITAL

It is thus important to look and examine the sources of income to a hospital since this will enable us to have a clear understanding of the systems. Since the items of income of a hospital are not similar to those of ordinary business entity.

These items are divided into two sub-heading, viz;
a) Medical fees
b) Non-medical fees.

MEDICAL FEES SOURCES OF FUND

These belong to the items of medical services, that is these income are those that relates to the main hospital business. They are as follows:

i. Admission fees: Admission fees are payable to the hospital when a patient is fully permitted to receive services from the hospital. This sum is always equal to all patients in the hospital.

ii. Diet fee: This income depends on the quality and quantity of diet the hospital is giving to the patient.

iii. Nursing services: Nursing services depends on the number of times the patient receives such services.

iv. Operating fees: This income depends on the nature of operation. Presently, in some hospitals the sum payable by patients ranges from ₦5000 and above.

v. Sterilization: This comes as a result of taking care of injuries and tendering it till the wound is healed.

vi. Card fees: In the form of admission fee, it is payable for treatment on this card recommendation is made by doctors.

vii. Open Health Operation fees: These incomes relates to outdoor operation services rendered by the hospitals to her patients.

viii. Physiotherapy: This income is generated as a result of treatment by means by exercise, massage, the use of light, heat, electricity and other natural forces.

ix. Casual collection fees: These fees are charges per head on collection of casualty. Example, motor accident victims who are unfortunate.

x. Storage of body: Where a patient dies at the hospital and the body is left for some days at the hospital, an amount is paid by the relatives of the decreased on collection of the body.

xi. Anti-Natal: This income is generated from the periodic check of pregnant women at the hospital during pregnancy.

xii. Lab-fee: For laboratory tests carried on by the laboratory scientist at the hospital to generate income.

xiii. Ultra-sound: Similar to lab fee, X-ray fee, etc.

NON-MEDICAL SOURCES OF FUND

These include other services which are indirectly related to the services of

a hospital. They include following fees:
1. Sale of forms: Hospitals sells forms to intending Nursing students and the money paid for this form are usually not refundable even where the applicant fails.
2. Grants: These may be from government for improvement of services and equipments in the hospitals. For instance, World Health Organisation (W.H.O) may through its agencies in the country decide to grant hospital some money for improving the services but this is usually to government owned hospitals.
3. Donations: These incomes are not always expected. It is a wilful gift from individuals, organisations, and government agencies to the hospitals. Example, government may donate a sum of money to the hospital.

COST BENEFIT ANALYSIS

COST BENEFIT ANALYSIS

The term cost benefit analysis as Broadway pointed out refers to the measurement of the economic benefits from any change in resources allocation. In the context of public finance, it most often refers to calculation of net special benefit arising from specific public expenditure such as road, irrigation or a disease control programme.

Nepworth (2000) defined cost benefit analyses as a technique for use in either investment appraisal or measuring the cost and benefit of the community adopting specified course of action.

The objective of cost benefit analysis is that it tries to take into account all the cost and benefits which will accrue from project.

Therefore, cost and benefit are defined in the widest sense and not only to narrow accounting definitions.

MANAGEMENT AUDIT

MANAGEMENT AUDIT

Management audit according to Auditing Guidelines, is an objective and independent appraisal of the effectiveness of managers and the effectiveness of the corporate structure in the achievement of company objectives and policies. Its main aim is to identify existing and potential management weakness within an organisational and to recommend ways to rectify, these weakness.

Herbert suggests the following definitions:
a) Management auditing is the terms used for evaluating the efficiency and economy of a given operation.

b) It is distinct from program auditing which is used to evaluated the effectiveness of a given operation.

c) Management auditing could be described as performance auditing.

Washbrook (1999), gives a wider definitions as follows “Because of the importance of standards procedures and controlled organisations, there has been a tendency to extend the functions of internal audit departments, to cover the checking of many aspects which are neither financial nor connected with the assets of the company in the accounting sense.

The total examination of an organisation, or part of it include checks on the effectiveness of managers; their compliance with professional standard; the reliability of management data; the quality of performance of duties and recommendations for improvement. These are variously termed management audits”. A management audit would focus attention on the managers themselves.

The primary aim of management audit is to motivate management to take action which will lead to an increase in efficiency and decrease in expenses and also increase in profitability of an organisation through exist reduction.

Philip explained management audit as a systematic, comprehensive, critical and constructive examination and appraisal of the organisational structure, management practice and method conducted by an external auditor.

It involves a review of each and every aspect of management activities and its objective is to ascertain whether or not economic resources of an organisation are used by its management in the most economic way to produce the maximum possible result in the shortest possible time in accordance with its goal management audit contains management auditors finding and specific recommendation, its objective is to motivate management to increase in efficiency and profitability of the organisation.

REFERENCES

Ejiofor, P. (2002). Managing Government owned Companies. Enugu: Fourth Dimension Publishing.

Drury, C. (2002). Management and cost accounting. London: Thomson learning Publishers.

Copeland, R. N (2004). Management Accounting, New York: John Willey and Sons 1978

Bigg, and Davis (2000). Internal Auditing, 4th Edition. London, H. F. L Publishers.

Batty, J. (2003). Management Accounting, Lagos: Kate Publishing.

INTERNAL AUDITING

INTERNAL AUDITING

The growing recognition by the management of the advantages of good internal control system and the complexities of an adequate system of internal control in government and privately owned hospitals has led to the development of internal Auditing as a method or form of control over all controls.

Giles (2001) notes that emergency of the internal auditor as a specialist in internal control is the result of an evolutionary process that is similar in some ways to he evolution of independent auditing.

Internal auditing is an element of internal control system set up by the management of an organisation to examine, evaluate and report on accounting and other controls in operation.

However, Lucey (2002) described internal auditing as a review of operations and records, sometimes a continuous undertaken without an organisation by specially assigned staffs.

Internal audit is defined as an independent appraisal activity established within an organisation as a service to it. It is a control which functions by examining and evaluating the adequacy and effectiveness of other controls.

FEATURES OF INTERNAL AUDITING

From the above definitions, two main features of internal auditing emerge:

a) INDEPENDENCE: Although an internal audit department is part of an organisation, it should be independent of the line management whose sphere of authority it may audit. The department should therefore report to the board or to a special internal audit committee and not to the finance director.

The reason for this is best seen by thinking about what could happen if the internal audit department reported some kind of irregularity to a finance director without realizing that the finance director was actually involved.

b) APPRAISAL: Internal audit is concerned with the appraisal of work done by other people in the organisation, and internal auditors should not carryout any of the work themselves. The appraisal of operations provides a service to management, providing information on strengths and weakness throughout the organisation.

SCOPE AND OBJECTIVES OF INTERNAL AUDITING

the scope and objectives of internal audit are as follows:

I. Review of the accounting and internal control system: Management is responsible for the establishment of adequate accounting and internal control systems. Often, internal audit is assigned specific responsibility for reviewing the design of the systems, monitoring their operations and recommending improvements.

II. Examination of financial and operating information: This may include review of the means used to identify, measure, classify and report information and specific enquiry into individual items including detailed testing of transactions, balances and procedures.

III. Review of economy, efficiency and effectiveness: This review may include the non-financial controls of an organisation.

IV. Review of compliance: This review may cover compliance with laws, regulations and other external requirements and with internal policies and directives and other requirements including appropriate authorization of transactions.

V. Special investigation: One example is suspected frauds.

The essentials for effective internal auditing are as follows:

I. Independence: The internal auditors should have independence in terms of organisational status and personal objectivity which permits the proper performance of their duties.

II. Staffing and Training: The internal audit unit should be appropriately staffed in terms of numbers, grades, qualifications and experience, having regard to its responsibilities and objectives. Training should be a planned and continuing process at all levels.

III. Relationships: The internal auditors should seek to foster constructive working relationship and understanding with the management, external auditors, with any other review agencies and where one assets with audit committee.

IV. Due care: The internal auditors cannot be expected to give total assurance that control weakness or irregularities do not exist, but they should exercise due care in fulfilling their responsibilities.

V. Planning, controlling and recording: Like the external auditors, internal auditors should adequately plan, control and record their work. As a part of planning, the internal auditors should identify the whole range of systems within the organisation.

VI. Evaluation of internal control system: The internal auditors should identify and evaluate the organisations internal control system as a basis for reporting upon its adequacy and effectiveness.

Therefore, Nepworth (2000) opines that the most important concern of internal audit is to ensure that financial dealing of organisation are conducted in proper manner, that no fraud or misappropriation of funds or accounts occurs and that proper system of financial control including internal check arrangement, that is one part of the system automatically checking on another exists.

REFERENCES

Anderson, R. J. (1999). Federal Audit, concept and Techniques. Toronto: Pitman Publishing Company.

Bigg, and Davis (2000). Internal Auditing, 4th Edition. London, H. F. L Publishers.

Hermanson, E. S (2002). Accounting principle. Columbia Charika Publisher.

Nwoko, C. (2008). Internal Control in Business. Enugu: Abic Books Ltd.

INTERNAL CONTROL

INTERNAL CONTROL

The Auditing practices committee defines internal control system as the whole system of control, financial or otherwise, established by the management in order to carry on the business of the enterprise in an orderly and efficient manner, ensure adherence to management’s polices, safeguard the assets and secure as far as possible the completeness and accuracy of the records.

Control procedures which means those policies and procedures which management has established to achieve the entity’s specific goals and objectives. Specific control procedures include:
a) Reporting, reviewing and approving reconciliations.

b) Checking the arithmetical accuracy of records.

c) Maintaining and reviewing control accounts and trial balances.

d) Approving and controlling of documents.

e) Comparing and analysing the financial results with budgeted amounts.

Some of the features of internal control are as follows:

  1. Segregation of duties: One of the prime means of expenditure control is the separation of those responsibilities or duties which would, if combined, enable one individual to record and process a complete transaction, segregation of duties reduces the risks of intentional manipulation or error, and increases he element of checking.
  2. Physical: These internal controls are concerned mainly with the custody of assets and involve procedures and security measures designed to ensure that access to assets is limited to authorized personnel.
  3. Authorization and Approval: All transactions and actions should require authorization or approval by an appropriate responsible person.
  4. Supervision: Any internal control system should include the supervision by responsible officials of day-to-day transactions and the recording thereof.
  5. Arithmetical and Accounting: These are controls within the recording function which check that the transactions to be recorded and processed have been authorized, that they are all included and that they are correctly recorded and accurately processed. Such controls include checking the arithmetical accuracy of the records, the maintenance and checking of totals, control accounts and accounting for documents.
  6. Personnel: This is the procedures to ensure that personnel have capabilities commensurate with their responsibilities.
    John (2002) states that even basically honest employees may be tempted occasionally to steal assets or otherwise o take advantage of his/her position of authority to trust in the company.Guarding against dishonest and honest mistakes are the prime concern of expenditure control which can be expected through its accounting procedures.

An organisation whether profit or non-profit making needs to design, install and enforce concrete procedure and method so that its accounting system will be highly reliable.

It is management’s lack of attention to internal control that encourages expenditure to reach a very high level.

There is no substitute for good internal control system as a means of expenditure control.

RESPONSIBLITY FOR INTERNAL CONTROL

Willsmore (1999) attests, that responsibility for establishing and maintaining adequate internal control rests with the management. This attestation is supported by the CICA in Audit Technique study, internal control and procedure audit test where it states that “it is management which is responsible for safeguarding the assets, ensuring that accounting data is reliable, promoting operating efficiency and adherence to prescribed policies.

It points out that the internal control system should not be regarded as something installed purely to meet the auditor’s need, but should include the controls which the management considers necessary to discharge its responsibilities.

Willsmore, however notes that an auditor in making audit is to review the internal control system and check that which is in existence. As a result, he noted that the auditor may recommend modifications and improvements to the system but the entire responsibility for safeguarding the asset still rest on the shoulder of the management.

There are two approaches to the classification of internal control, vix:

a) That given by the Auditing Statement and Guidelines 3204. The guideline classified internal control by organisation, segregation of duties, physical control, authorization and approval, arithmetic and accounting, personnel supervision and management.

b) International standards on Auditing (ISA 400) classified the internal control by its objectives, Jurisdiction method and general nature.

REFERENCES

Hermanson, E. S (2002). Accounting principle. Columbia Charika Publisher.

Jack, C. R. (2004). Auditing Practices. London: Butter Worst Publisher.

Nwoko, C. (2008). Internal Control in Business. Enugu: Abic Books Ltd.

Ama, G. A. N (2001). Management and cost accounting: current theory and practice. Abia. Amasons publishers ventures.

OVERVIEW OF EXPENDITURE CONTROL

OVERVIEW OF EXPENDITURE CONTROL

Expenditure control involves the regulations, limitations of confinement to expenses to minimize over spending and ensure compliance with specified plans of the organisation. Expenditure control also means the management tools that guides and ensure that the organisational spending are in accordance with the policy plans and for the achievement of organisational goals and objectives.

For expenditure control to be effective, it must have a dual purpose, viz:
a) It must attempt to keep, misappropriation, inefficiency and other expenses under check.

b) It must allow for re-allocation of system of record which will establish accountability for expenses, the employment of current and concise accounting and statistical report to reveal their duties.

Expenditure control is also the regulation of cost of operating s business and is concerned with keeping the costs within acceptable limits. Expenditure control can be seen as an exercise in good managerial activities by avoiding wasteful use of valuable resources and encouraging efficiency and cost consciousness.

However, expenditure control is the process of ensuring that firms activities conform to its plan and that its objectives are achieved. There can be no control without plans and objectives, since these predetermine and specify the desirable behaviour and set out the procedure that should be followed by members of the organisation to ensure that a firm is operated in a desired manner. Expenditure control encompasses all the methods and procedures that direct employees towards achieving the organisational objectives.

Therefore, the aim of expenditure controls is to influence the employees behaviours in desirable ways in order to achieve the organisations goals and objectives and in order to increase profitability.

REFERENCES

Adeniji, A. A (2009). Cost accounting: a managerial approach. Lagos. El Today Ventures Limited publishers.

Ama, G. A. N (2001). Management and cost accounting: current theory and practice. Abia. Amasons publishers ventures.

Asika, S. D. (2001). Loss Prevention, control and concepts, London: Butter Worst Publisher.

Hermanson, E. S (2002). Accounting principle. Columbia Charika Publisher.

Howard, F. (2003). System Based Independent Audit. New Jersey: Prentice Hall Inc.

THE PROBLEM OF INVENTORY MANAGEMENT

THE PROBLEM OF INVENTORY MANAGEMENT

The method to be used in inventory valuation has been the perennial problem that is prevalent with all organizations. Organizations maintain and keep adequate inventory for a number of reasons. Fundamentally, it may be economically impossible or unsound to have goods manufactured or supplied in a given system precisely at the time the demand for it occurs.

Without inventory, customers will have to wait until the orders were met from a source external to the client firm or such orders may be delayed until production has been undertaken. In most cases, customers do not wait for this delay in production or supply and what happens is that the customers looks for alternative source of supply which means the loss of that customer either temporarily or permanently and the loss of the profit on the sale with its spill over effect.

In some cases, organizations may deem it necessary to hold a good number of inventories when it is absolutely certain there is a likely possibility of an upward shift in material input or supply prices. The organization on the other hand may keep lower inventories when it anticipate a decrease in material or supply prices.

It is pertinent to indicate that in retail concerns, inventories are maintained in order to have various goods on display but still attract potential customers. There is this ascertain that varieties of goods on display to customers help to boost sales and profit. In practice, raw materials are purchased in large quantities in order to reduce cost associated with purchasing to obtain a favorable price, minimize handling and transportation cost. Inventory is of enormous economic benefits to organizations. However, the valuation of inventory has been a common problem in most organization.

According to Doug Brinlee (2006:379) he said that a successful business relies on many factors, one of which is a reliable inventory management system. Inventory management problems can interfere with a company profits and customer service. They can cost a business more money and lead to an excess of inventory over stock that is difficult to move. Most of these problems are usually due to poor inventory processes and out of date system. They are a number of problems that can cause havoc with inventory management. Some happen more frequently than others. Here are some of the more common problems with inventory system:

  • Unqualified employees in charge of inventory.
  • Using a measure of performance for their business that is too narrow.
  • Unrealistic business plan for a business for the future.
  • Not identifying shortage ahead of time.
  • Too much “distressed stock” in inventory
  • Items in stock getting misplaced
  • Not keeping up with the rising price of raw materials, etc

Sunday, 30 October 2016

QUALITY OF INFORMATION

QUALITY OF INFORMATION

Information is a vital resource for the success of any organization. Future of an organization lies in using and disseminating information wisely.

Good quality information placed in right context in right time tells us about opportunities and problems well in advance.
Good quality information: Quality is a value that would vary according to the users and uses of the information.

According to Wang and Strong, following are the dimensions or elements of Information Quality:

Intrinsic:

Accuracy, Objectivity, Believability, Reputation

Contextual:

Relevancy, Value-Added, Timeliness, Completeness, Amount of information

Representational:

Interpretability, Format, Coherence, Compatibility

Accessibility:

Accessibility, Access security. Various authors propose various lists of metrics for assessing the quality of informations. Let us generate a list of the most essential characteristic features for informations quality:

Reliability

It should be verifiable and dependable.

Timely

It must be current and it must reach the users well in time, so that important decisions can be made in time.

Relevant

It should be current and valid information and it should reduce uncertainties.

Accurate

It should be free of errors and mistakes, true, and not deceptive.

Sufficient

  It should be adequate in quantity, so that decisions can be made on its basis.

Unambiguous

It should be expressed in clear terms. In other words, in should be comprehensive.

Complete

It should meet all the needs in the current context.
• Unbiased – It should be impartial, free from any bias. In other words, it should have integrity.

Explicit

It should not need any further explanation.

Thursday, 13 October 2016

An Automated Teller Machine (ATM)

An Automated Teller Machine (ATM)

An automated teller machine (ATM), or automated banking machine (ABM) is a computerized telecommunication device that provide the clients of a financial institution with access to financial transactions in a public space with the need for cashier, human clerk or bank teller. On most modern ATMS, the customer is identified by inserting a plastic ATM CARD with a magnetic stripe of a plastic smart card with a chip, that contains a unique card and some security information such as an expiation data or authentication provided by the customer entering a personal identification number (PIN).

Using an ATM, customer can access their bank account in order, to make cash withdrawal or credit card and check their account balance. If the currency being withdraw from the ATM is different from that which the bank account is dominated, the money will be converted by a wholesale exchange rate for foreign travelers and heavily used for the purpose as well. ATM are known by various other names including automated, transaction machine, automated banking machine money machine, cash machine, bank machine hole – in – the wall, any time money. Both work with a card with magnetic shape at the bank. Hence all those worked on various principles including magnetism in order to make fraud more difficult. The idea of pin stored in a card is developed by British engineer working in the MO2 named James Good fellow. After looking at the experiences in Europe ink 1968 the networked ATM was creased in Dallas, Texas, by Donald Wetzel who was a department head at automated baggage – handling company called Docutel in 1995, the national museum of a American, the history recognized Docuturel as the inventors of the networked ATMs.

ATM are not placed near or inside the premises of banking, but also in locations. Such as shopping centers, airports, petrol gas stations, restaurants or any place language stations restaurants or any place large number of people may gather. These represent the two types of ATM installation and they are:

On premises and off premises.

ON premises: On premises, ATMs are typically more advanced, multi-function machines that complement on actual bank branch capabilities and is more – expensive.

Off premises:

Off premises, machines are deployed by financial institutions and also independent sales organizations (150) where cash, so they are cheaper mono-function devices. When an ATM is not operated by a financial institution it is known as while label ATM”. Many ATM have a sign above them indicating the name of the bank or organization owing them ATM, possibly including the list of ATM network to which that machine is connected. This type of sign is called topper.

Most ATMs are connected to inter-bank networks, enabling people to withdraw and deposit money from machine not belonging to the bank where they have their account or the country where their account are held.

Many bank charge ATMs usage money or fee. In some cases, these fees are charge solely to users who are not customers of the bank where the ATM is installed in other case, they apply to all users. Where machine make some charge some people will not use them but to system without fees.

ALTERNATIVE USES OF ATMs

Although ATMs were originally developed as just cash dispensers, they have evolved to include many other bank – related functions such as:

  • Deposit currency recognition and acceptance Paying bank statement
  • Printing bank statement
  • Updating passbooks
  • Adding prepaid cell phone credit
  • Loading monetary values into store value cards. Increasing banks are seeking to use the ATM as a sales device to deliver pre approval loans. ATMs can also act as advertising channels for companies to advertise their own product or the third party and service.

Saturday, 30 July 2016

Types of Library

Types of Library (ies)

According to Mbashir (2012), the types of services of any library depend on the purpose of the establishment and running of such library, as soon as libraries are classified according to the types of services and the patron they served. These different categories of libraries are the Academics, public, schools, special, private and National libraries. The focus of this study is on academic library, however the categories shall be considered:

1. Public Libraries: – These are established for the purpose of serving the generality of the society through tax: supports and they are without bias to sex, age, race or religion.

2. Academic Libraries:-These are libraries institution of higher learning like University, College of Education, College of technology and Polytechnics etc for impacting knowledge and research. They are meant to serve the communities of their respective institutions.

3. School Libraries:-These are libraries founded for the students and their teachers, the purpose of the libraries are almost the same with academic libraries but without any emphasizes on research and documentation.

4. Special Libraries:- These are libraries established by a particular organization who specializes in certain production, services or research, such as firm, banks, professional associations, government agencies, research institutes, media organization.

5. National Libraries:- These could be said to be special type of public library that are established and maintained by National government for some specialized functions like:

  1. Serve as a legal deposit of all publication emanating from the country.
  2. Issue of the National bibliography and national union catalogue
  3. Stock collection of foreign publications
  4. Issuing of ( ISBN) and (ISSN) numbers
  5. Coordination of the activities of other types of libraries within the country.

6. Private libraries: – Libraries established by individuals are known as private libraries they are more restricted in use than any other type of libraries. Because, the owner determines who to use them.
7. Mobile libraries: A mobile library is a vehicle designed for use as a library. It is designed to hold books on shelves in such a way that when the vehicle is parked they can be accessed by readers. Mobile libraries are often used to provide library services to villages and city suburbs that have no library buildings.

The Economic Development communication and its functions in achieving government policy

The Economic Development communication and its functions in achieving government policy

Economic Development communication: Providing citizens with information on priorities, programmes and activities is a vital government function which underpins state-society relations. Governments in the developed world are acutely aware of the need to communicate effectively both to influence public opinion and maintain their legitimacy, and often construct elaborate structures of press offices, and information ministries to perform the communication function. But in many developing countries, governments lack communication capacity, and the development of the communication function is hampered by a combination of weak incentives (e.g. no culture of disclosure), lack of professional training and communication infrastructure, and lack of supportive legal framework (e.g. access to information laws).

Institutional culture often plays an important role in shaping a government’s approach to communication, but changing institutional culture takes time. Providing citizens with adequate information on priorities, programmes and activities contributes to government legitimacy and actualization of this economic policies. To be legitimate players in public spheres, governments need to develop and maintain effective communication capacity. This allows them to take stock of citizens’ needs and preferences, and to foster a more deliberative public space for multi-stakeholder participation, informed policy debate and development effectiveness. Key areas for consideration include:

The functions of government communication: There are three primary functions of government communication which are:
i. Informing
ii. Advocating/persuading (for policies and reforms), and
iii. Engaging citizens.

Effective public communication efforts enable citizen participation, but many countries lack a culture of consultation and participation, exacerbated by low literacy rates and lack of information provision. In many cases, countries not only lack capacity in communication between government and the public, but also internal communication among government agencies.

Incentives for government communication: Governments need to be aware of the incentives for communicating. They often do not realise that communication is part of their job and is fundamental to their functioning. Lack of communications budgets, secrecy laws, lack of elite will to share information, or the preference for communicating through state-owned media, can be disincentives for government to develop communication capacity.

The role of ethics in government communication: Government communication involves not only sending out persuasive messages to the public, but also explaining working policies, creating awareness of the rights of citizens, and developing mechanisms that enable two-way communication between citizens and government. Donors and governments need to understand that government communication is not propaganda.

The enabling environment for government communication: Well drafted, legally binding and enforceable policies on access to information are crucial factors of an enabling environment, along with media literacy and strengthened media organisations.

The lack of professionalism in government communication in developing countries presents a serious challenge. Many governments lack the infrastructure needed for effective communication. Supporting government communication capacity as ‘information development’ may be a useful approach. There are two sides to information development: First, a culture of disclosure needs to be created; and second, governments need to have relevant information available. Further recommendations include the following:

Government communication capacity can be increased by drawing on traditional systems of communication already in place and developing professional associations among spokespeople. Coordination among government departments is also necessary. Methods that are interactive, citizen-based and focus on peer-to-peer learning are important tools in building communication capacity.

It is important to address the lack of journalistic professionalism. In some countries, governments are unwilling to work with the media because they don’t trust them to report objectively. Therefore, journalism training is a component of government communication capacity. Government communication is as much about attitude as it is about aptitude. In some cases, governments totally own, manipulate and/or terrorise the media in their country. Institutional culture often plays an important role in shaping a government’s approach to communication. Innovative approaches are needed to build trust and find common ground among NGOs, media and government.

Wednesday, 27 July 2016

Goals and Tools of Facilities Managemen

Goals and Tools of Facilities Management

Management of facilities goals cannot be convincing because what they majorly aimed at is to exploit the potentials benefit of the adoption of facilities management to the greatest extent which alternately may probably not been previously unexploited for the potential benefits of the business organization.

According to Hamer (1988) state in is understanding that gaining a complete control over the current condition or present situation of an organization is the primary need for facilities management. But to have such control, it greatly involves having a full understanding of what is already in an existence; who is using it presently; the purpose it serves and the cost of it.

The estate management strategic, which accords with the suggestion of Adewunmi & Ogunba (2006) that the core competencies of facilities management, property management, and construction management is the best area of contribution of the surveyor in the professional of facilities management. According to review from Meyer (2003) he states that competencies of facilities management have a lot of role to play in churn management and workspace.
Ascertaining that every bit of space in an organization is appropriately used and accounted for is another goal of facilities management with the interest of ensuring that the organization meets the trinity of investment objectives.

Facilities Management Functions

 According to Sekula (2003) emphasis is laid on the facilities manager were he says that success is not only anchored to how well or perfect a facilities manager does his job but how well a facilities manager can fits in. Therefore, comprehending the organization and its culture is very important. To start with, the need to initiate whether long-range strategic planning is in place and whether the plan is still valid is of essential. Issues that impact the safety and security of any organization and its employees are mission-critical issues. Operations and maintenance, technology infrastructure, workspace, and departmental organization are the class of operational challenges to b dealt with. The study did not only expatiate on the services being carried out with regards to facilities management business but also detail or expression about personal characteristics to be possessed by facilities managers’ effectiveness. The connection of the study to this research work is to study the establishment of human characters to the accomplishment of facilities management operations. More so, the commitment of facilities management is basically to present the workspace management of an organisation.

Owen (1995) gives the twelve break-down of facilities managements business area, this twelve business areas are further broken-down with the aim of giving the detail components. The major headings include law, human resources, information technology, building and real estate, marketing, support services, building maintenance services, business management, operations, building capital works, finance and churn management

Motivation of Staffs for Improve Productivity

Motivation of Staffs for Improve Productivity

For every business institutions, staffs are the main implementer of sets or giving policies. Between the management and the customers, they are the strategic link. Therefore this make the motivation of staff becomes very much important, crucial and necessary especially when the delivery of high quality of services is of high priority or of paramount and essential because the quality of services is a subjective concept. This is related to the level at which the current experience diverge from the main expected experience within responsibilities or range of responsibilities. Therefore to determine the quality of staffs, there should be great different in what you get and what you are expected. Because when one gets more than expected there is definitely quality in work done. According to Bevan (1991) he states six summaries of the major points of services management for staff.

i. The staff is responsible for managing client’s involvement.

ii. Staff should look for both the positive and the negative circles; make more noticeable the positive; and try to completely remove the negative.

iii. Responsible to manage work action, and make the action correspond.

iv. Staffs are responsible to manage customer’s expectation – everybody is conscious of quality therefore it is regards as the difference between expectation and reality.

v. Staffs are also expected to guide against problem at all cost most especially at contact point. Contact point is the point at which the client experience the services

vi. A staff is also expected to have set style of operation.

Therefore it is of vital important that staffs are carried along in all the activities of the organization.

HISTORY OF THE COOPERATIVE MOVEMENT IN NIGERIA

HISTORY OF THE COOPERATIVE MOVEMENT IN NIGERIA

The modem type of cooperative was introduced formally into Nigeria by the colonial government in Nigeria that is the British colonial administration in 1935.

The British colonial government had in 1904 introduced the cooperative movement into India which was one of the Bri6tish colonial government in India enacted a cooperative law in India. Following the success recorded in India, the British colonial government in Nigeria tried to experiment the introduction of cooperative in Nigeria.

The year 1935 cooperative movement in Nigeria was taken by the colonial government in Nigeria to enact the Nigeria cooperative society’s ordinance.

The government tried to investigate the possibility and desirability of introducing the cooperative movement into the colony of Nigeria. Thus in 1933 the government invited a cooperative expert, Mr. C.F. Strickland, C.I.E, from India and request him to make an investigative tour of Nigeria and to advice the Nigeria government on the desirability and possibility of introducing cooperative movement into the colony of Nigeria Mr. C.F Strickland carried out the investigation and submitted his report and the 17th April, 1934.in the report battled report on the strongly recommended the introduction of the cooperative movement into the colony of Nigeria, main training that cooperative societies would help to improve the economic and social conditions of Nigeria and among other.

The report was accepted by the government. After the acceptance, the government enacted the first Nigeria cooperative society’s law. In 1935 while in 1936 regulation were drawn up to guide the running of cooperative societies. Cooperative cocoa societies stared in the western part of Nigeria. In 1938, worker formed cooperative thrift and loan societies in the eastern and western of Nigeria.

Mr. Strickland was skeptical about the Africans ability to organize the run of cooperative on their owner, he therefore, recommended for serious government intervention, can troll guidance and involvement form the asset in cooperative matters in Nigeria. Then government adopted wholly Mr. Strickland’s recommendation and went ahead to organize and control cooperative and it has continued till the present day almost in its totality.

In 1936 major E.F.C. Haig was appointed the first register of cooperative societies in Nigeria. While in 1937, Mr. J.U Eke, M.B.E was appointed as the first inspector of cooperative in eastern Nigeria and he worked in calabar province. As soon as the cooperative movement was introduce into the country it started to grow. By the end of 1944, there were one hundred and eight one (181) cooperative societies in Nigeria. Different types of cooperative societies were springing up in various part of the country such as:
i. Produce marketing cooperative societies in the western.
ii. Credit and consumer cooperative in the east.
iii. Credit and market cooperative in the Northern provinces. Therefore, cooperative thrift and loan societies sprang up in those urban centers and spread to other towns.

The history of cooperative movement in Nigeria has been one of continuous growth. For better appreciation it is grouped into three stages:
1. The stage that describes the introduction or birth of the movement to the Rockdale centenary conference helps in Lagos in august, 1944.
2. The stage describes the regionalization of the movement in 1951, and
3. The state that describes the period of consolidation.

ORIGIN AND GROWTH OF MODERN COOPERATION

Cooperative ideals which metamorphosis into the Rocha dale equitable pioneers had origin Thus what is today regarded as the modern type cooperative movement owes its basic beginning to toad to the activities of in Rocha dale equitable pioneers of toad lane, England in 1844. It is of interested to note here that cooperative is as old as man.

The Rockdale pioneers were the first to go into business as a cooperative and to register. They opened a retail consumer shop according to the cooperative principle volunteer democracy Common ownership and equity. Every one brought shares of one pound each and brought their supplies from the shop in cash according to their rules. Their officers were honest highly committed and fully accountable their methods led them to success and they become a model for cooperative all over the world. The secret of their success can trace to the following factors.

  1. Application of owenite idealism
  2. Adoption of business-life
  • Enlightened and committed membership
  1. Lessons learnt from the failure of pre-Rockdale cooperative

They started with a shop using it as the foundation for further development, providing the member with self-employment and finally establishing a self-supporting community.

 SCOPE OF COOPERATIVE SOCIETY EDUCATION

The scope of cooperative education include

  1. Information: this involves informing the general public about cooperative developments.
  2. Member education: this refers to the development of members potentials for social action and personal growth
  • Training of cooperative employees
  1. Government official and would be members.

MOTIVES OF INVESTMENTS

MOTIVES OF INVESTMENTS

No matter the form in which investment ideas are contemplated, they are under laid with fundamental beneficial or satisfying motives, which must be of advantage to the investors and promoters. These desired motives or benefits could be classified into the following:-

(a) Social Benefits;

(b) Political Benefits;

(c) Economic Benefits.

(a) SOCIAL BENEFITS:

These are benefits in kind. They do not necessarily or directly confer financial interests (Thorncroft, 1965). They are intangible to the investment promoters and may arise just to promote the social status or ego of the investor and as such amount to self-actualization of the social interest on the investors. A few examples would suffice:

(i) A government is pleased with the successful establishment of social amenities in communities. In this case the operators in government and the benefiting communities derive satisfaction from the facilities. The social image of the operators in government is thus enhanced and as such, they enjoy and wield more leadership influence.

(ii) A man who executes his marriage ceremony without problems considers this social project a success and as such derives social satisfaction from the venture.

(iii) A man who has four children and has all of them graduated from the polytechnic/university with gainful employment considers his marriage institution well blessed and successful. After all a marriage is a social relationship with benefits as an end.

POLITICAL BENEFITS:

These are also intangible benefits to the investors. They may take the form of political power being their ability to influence decisions in the communities. Such investors may occupy political positions, thus increasing their ability to wield some defined dispositions and acting as heavy weights in society.

Eminent personalities in these political positions enjoy social adulation and powerfully wield derived authority within the communities. This is often the case within the traditional political institutions such as “Oba”, “Obi”, “Chief”, “Alafin”, “Oni”, “Emir”, Obong, etc. They often exercise heavy political authorities in the administration of their domains.

There are issues everyday that are dealt with by those occupying political positions such as the president, prime minister, governors, legislator, senator and councilor. They derive political benefits from their positions.

ECONOMIC BENEFITS:

These normally take the form of tangible benefits to the investors. Economic benefits may arise in the form of:

(i) Capital gains: Here, there is capital appreciation realizable at the end of the business. The surplus capital realized enables the investor to recycle the investment if its level is attractive.

(ii) Periodic income flow: Here, the investor receives periodic income flow. This may be on daily, weekly, monthly, half-yearly or annually throughout the projects life as desired by the investor(s).

To enjoy these benefits the investor(s) adopt cost effective strategy with good management.

undefinedSOLD BY: Enems Project| ATTRIBUTES: Title, Abstract, Chapter 1-5 and Appendices|FORMAT: Microsoft Word| PRICE: N5000| BUY NOW |DELIVERY TIME: Immediately Payment is Confirmed

undefinedSOLD BY: Enems Project| ATTRIBUTES: Title, Abstract, Chapter 1-5 and Appendices|FORMAT: Microsoft Word| PRICE: N5000| BUY NOW |DELIVERY TIME: Immediately Payment is Confirmed